Abstract:Both wood and bamboo are natural green biomaterials with a long application history in human society. A novel bamboo-wood composite fabricated with glued laminated bamboo (glubam) and laminated veneer lumber (LVL) was developed to reduce wood resource demand and to promote bamboo utilization efficiency. Experimental and analytical investigations were conducted to study the mechanical performance of 36 bamboo-wood composite columns with different slenderness ratios under axial compression. The three-layer composite column was composed of glubam as outer layers and LVL as a core layer, with horizontal or vertical configurations respectively. The failure modes, ultimate capacity, load and deformation behaviour were evaluated. Strength failure was the typical failure mode of the short columns while buckling was commonly observed for the longer columns. Columns with vertical LVL core had overall better performed with higher compressive strength than the ones with horizontal LVL core configuration. The ultimate load of the composite columns with thin-strip glubam as outer layers were increased by 31.6 % to 45.3 % than those of thick-strip glubam as outer layers. The compressive capacity of the specimens predicted according to three standards were compared with the experimental results. An improved expression considers the material strength and column slenderness ratio was proposed, which provides a better prediction than the current design standards.

Compression Strength of Hollow Sandwich Columns with GFRP Skins and a Paulownia Wood Core

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

Experimental Studies on Glubam Columns under Axial Compression

EXPERIMENTAL STUDIES OF GLUBAM COLUMNS UNDER AXIAL LOADS

EXPERIMENTAL AND THEORETICAL STUDY OF COMPOSITE SANDWICH COLUMN UNDER AXIAL COMPRESSION

Axial Compression Behaviours of Pultruded GFRP–Wood Composite Columns

Axial Behavior of Columns with Glass Fiber-Reinforced Polymer Composite Shells and Syntactic Foam Core

Compressive Behaviour of Wood-Filled GFRP Square Columns with Lattice-Web Reinforcements

Structural behavior of load-bearing sandwich wall panels with GFRP skin and a foam-web core

EXPERIMENTAL STUDY ON INTERFACE PERFORMANCE OF GFRP COMPOSITE SANDWICH COLUMN WITH WOOD-PLASTIC COMPOSITE CORE

Axial compressive properties of GFRP-reinforced PVC-based glued wood-plastic composites column

Behavior of Glulam Columns Reinforced by Near-Surface-Mounted Cfrp Laminates under Eccentric Compression Loading

Experimental Investigation and Design of Hollow Section, Centrifugal Concrete-Filled GFRP Tube Columns

AXIAL COMPRESSIVE PROPERTIES OF GLASS FIBER-REINFORCED POLYMER-MACROFOAM COMPOSITE COLUMNS

Elastoplastic Approach for Studying the Behavior of FRP Confined Wood Column under Axial Compression

Experiment and Capacity Calculation Theory Research of Hybrid GFRP-concrete-steel Double Skin Tubular Columns under Axial Compression

Experimental study on the compression behavior of long timber column strengthened with the novel hybrid fiber sheets

Flexural behaviors of GFRP-wood sandwich beams with recycled wood formwork cores

Experimental study on axial compression behavior of square pultruded GFRP tubular stub column

Investigation on various section GFRP profile strengthening concrete-filled GFRP tubular columns

EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE