Abstract:Facing the substantial protection requirements for reinforced concrete structures exposed to severe erosion conditions, a novel composite material(Basalt Fiber Reinforced Polymer, BFRP) based on epoxy silicone resin as a matrix was introduced in this study. This material exhibits notable enhancements in resistance to acid and alkali corrosion, ultraviolet irradiation, as well as high and low temperature extremes. However, it exhibits lower elastic modulus and higher ductility. To evaluate the effectiveness of this new BFRP composite material in reinforced concrete structures, a comprehensive investigation was conducted by model testing, numerical simulations, and theoretical analysis. This study analyzed the impact of wrapping configuration, number of wrapping layers, concrete strength, and spacing-to-bandwidth ratio on the mechanical properties of concrete square columns. The findings revealed that the loading curve trends for specimens reinforced with the new BFRP sheet and CFRP sheet (Carbon Fiber Reinforced Polymer, CFRP) were almost similar, although the reinforcement effect was comparatively worse for the former. When both layers were fully applied, the axial compression bearing capacity increased by 28.45% and 64.73%, respectively. The number of wrapping layers and the parameters related to concrete strength significantly influenced the reinforcement effect, whereas the influence of spacing-to-bandwidth parameters was less pronounced. Current specifications demonstrate suitable applicability for CFRP-reinforced specimens but limited applicability for BFRP. The calculation model proposed in this paper accurately predicted the axial compression bearing capacity of a new BFRP-reinforced columns, with an error margin kept within 5%.

EXPERIMENTAL STUDY ON INTERFACE PERFORMANCE OF GFRP COMPOSITE SANDWICH COLUMN WITH WOOD-PLASTIC COMPOSITE CORE

Axial Impact Behavior of FRP-Confined Concrete Stub Columns with Square and Circular Cross Section

EXPERIMENTAL AND THEORETICAL STUDY OF COMPOSITE SANDWICH COLUMN UNDER AXIAL COMPRESSION

Axial Compression Behaviours of Pultruded GFRP–Wood Composite Columns

EXPERIMENTAL STUDY ON AXIAL COMPRESSIVE BEHAVIOR OF TIMBER COLUMN LATERALLY STRENGTHENED WITH FRP

Elastoplastic Approach for Studying the Behavior of FRP Confined Wood Column under Axial Compression

Axial compressive properties of GFRP-reinforced PVC-based glued wood-plastic composites column

Experimental Study on the Impact of Using FRP Sheets on the Axial Compressive Performance of Short-Circular Composite Columns

EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE

Compression Strength of Hollow Sandwich Columns with GFRP Skins and a Paulownia Wood Core

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Study on flexural property of glass fiber-reinforced polymer reinforced wood–plastic composite panels

Experimental Study on Dynamic Response of CFRCM Confined Seawater Sea Sand RC Columns Subjected to Lateral Impact

Compressive Behavior of Composite Concrete Columns with Encased FRP Confined Concrete Cores.

EXPERIMENTAL RESEARCH ON THE FLEXURAL PROPERTIES OF PAULOWNIA WOOD CORE COMPOSITE SANDWICH PANEL REINFORCED BY LATTICE WEBS

An Experimental Investigation of Static and Fatigue Behaviour of GFRP Sandwich Beams with a Web Reinforced Wood Core

Experimental-numerical study on axial compression performance of square concrete columns confined by new-type BFRP

AXIAL COMPRESSIVE PROPERTIES OF GLASS FIBER-REINFORCED POLYMER-MACROFOAM COMPOSITE COLUMNS

Axial Compressive Strength Experimental and Numerical Studies of Full-Scale Specimens Simulating GFRP Composite Bushing Column

Experimental Investigation on Axial Compressive Behavior of Frp Confined Concrete Columns

Compressive Behaviour of Wood-Filled GFRP Square Columns with Lattice-Web Reinforcements