Abstract:Facing the substantial protection requirements for reinforced concrete structures exposed to severe erosion conditions, a novel composite material(Basalt Fiber Reinforced Polymer, BFRP) based on epoxy silicone resin as a matrix was introduced in this study. This material exhibits notable enhancements in resistance to acid and alkali corrosion, ultraviolet irradiation, as well as high and low temperature extremes. However, it exhibits lower elastic modulus and higher ductility. To evaluate the effectiveness of this new BFRP composite material in reinforced concrete structures, a comprehensive investigation was conducted by model testing, numerical simulations, and theoretical analysis. This study analyzed the impact of wrapping configuration, number of wrapping layers, concrete strength, and spacing-to-bandwidth ratio on the mechanical properties of concrete square columns. The findings revealed that the loading curve trends for specimens reinforced with the new BFRP sheet and CFRP sheet (Carbon Fiber Reinforced Polymer, CFRP) were almost similar, although the reinforcement effect was comparatively worse for the former. When both layers were fully applied, the axial compression bearing capacity increased by 28.45% and 64.73%, respectively. The number of wrapping layers and the parameters related to concrete strength significantly influenced the reinforcement effect, whereas the influence of spacing-to-bandwidth parameters was less pronounced. Current specifications demonstrate suitable applicability for CFRP-reinforced specimens but limited applicability for BFRP. The calculation model proposed in this paper accurately predicted the axial compression bearing capacity of a new BFRP-reinforced columns, with an error margin kept within 5%.

Axial Impact Behavior of FRP-Confined Concrete Stub Columns with Square and Circular Cross Section

Stress-Strain Behavior of FRP-Confined Recycled Aggregate Concrete in Square Columns of Different Sizes

FRP Spiral Strip-Confined Concrete Columns: Stress-strain Behavior and Size Effect

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Behavior of Different-Sized FRP-Confined Square Compound Concrete Columns Containing Recycled Concrete Lumps

Study on Behaviors of FRP Confined Stub Concrete Filled Square Steel Tubes under Axial Load

Experimental Research on Large-scale Square Columns Confined with Wrapped CFRP under Axial Compressive Load

Impact Behaviors of CFT and CFRP Confined CFT Stub Columns

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Axial impact behavior of Large-Rupture-Strain (LRS) fiber reinforced polymer (FRP)-confined concrete cylinders

Experimental-numerical study on axial compression performance of square concrete columns confined by new-type BFRP

Behavior of Cross Arms Inserted in Concrete-Filled Circular GFRP Tubular Columns

Experimental Study on the Impact of Using FRP Sheets on the Axial Compressive Performance of Short-Circular Composite Columns

Axial Compressive and Seismic Performance of GFRP Wrapped Square RC Columns with Different Scales

Axial Compressive Behavior of Square-Section Concrete Columns Transversely Reinforced with FRP Grids

Behavior of Partially and Fully FRP-confined Circularized Square Columns under Axial Compression

CFRP-confined square RC columns. I: Experimental investigation

Mechanical Behavior of FRP Confined Steel Tubular Columns under Impact

Axial compressive behavior of post-heated square concrete columns wrapped by BFRP sheets:An experimental investigation