Abstract:Profiled double-skin composite walls (PDSCWs) have been widely used in multi-storey building structures since the 1990s. Using re-entrant profiled plates as faceplates in the PDSCWs eliminates the need for additional connecting members, thus leading to economic designs and convenience in their fabrication. In this paper, analytical and numerical investigations are conducted to study the structural behaviour of PDSCWs with re-entrant profiled faceplates under eccentric compression. Advanced finite element (FE) models incorporating both material and geometric nonlinearities are established and validated against an independent series of test results. A parametric study is conducted to investigate effects of various parameters including material properties of steel and infilled concrete, thickness of the steel faceplates, and depth and width of the composite wall. It is concluded that increasing concrete strength and wall depth can significantly enhance both the axial and bending resistances of the PDSCWs. However, increasing the yield stress and thickness of the steel faceplates can only enhance the bending resistance of the PDSCWs. Therefore, compared to the PDSCWs with high strength steel, using high strength concrete is more effective to enhance the structural behaviour of PDSCWs. Moreover, a sectional analysis method is proposed to determine N-M interaction curves for PDSCWs under combined compression and bending. It is demonstrated that the N-M interaction curves determined by the proposed analytical method agree well with the FE results. Hence, the proposed sectional analysis method and the resulting N-M interaction curves are sufficiently reliable, and they can be used for designing PDSCWs with re-entrant profiled faceplates.

EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Development of an innovative composite sandwich matting with GFRP facesheets and wood core

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Structural behavior of load-bearing sandwich wall panels with GFRP skin and a foam-web core

Fiber Reinforced Composites Sandwich Panels with Web Reinforced Wood Core for Building Floor Applications

EXPERIMENTAL RESEARCH ON THE FLEXURAL PROPERTIES OF PAULOWNIA WOOD CORE COMPOSITE SANDWICH PANEL REINFORCED BY LATTICE WEBS

EXPERIMENTAL STUDY ON INTERFACE PERFORMANCE OF GFRP COMPOSITE SANDWICH COLUMN WITH WOOD-PLASTIC COMPOSITE CORE

Research on Mechanical Properties and Microstructures of Composite Wall Panels Made of High-Performance Fiber Reinforced Cement-based Composites

Flexural Experiment and Design Method of Steel-Wire-Enhanced Insulation Panels

Investigation of a Novel Composite Cladding Wall Panel in Flexure

Performance of Double-Skin Composite Walls with Re-Entrant Profiled Faceplates under Eccentric Compression

Behavior of sandwich wall panels with GFRP face sheets and a foam-GFRP web core loaded under four-point bending

Flexural Behaviour of GFRP-Softwood Sandwich Panels for Prefabricated Building Construction

Mechanics Properties of Paulownia Core Sandwich Composites

Study on flexural property of glass fiber-reinforced polymer reinforced wood–plastic composite panels

Mechanical Performance of Foam-Filled Lattice Composite Panels in Four-Point Bending: Experimental Investigation and Analytical Modeling

Edgewise compressive test and analysis for lattice web reinforced composite sandwich panels with foam core

An Experimental Investigation of Static and Fatigue Behaviour of GFRP Sandwich Beams with a Web Reinforced Wood Core

Flexural property study of multiaxial fiber reinforced polymer sandwich panels with pultruded profile cores

Experimental Study of the Flexural and Compression Performance of an Innovative Pultruded Glass-Fiber-Reinforced Polymer-Wood Composite Profile