Abstract:Fiber reinforced plastic (FRP) sandwich structure are increasingly used in construction areas recently for its high strength, light weight and corrosion resistance performance. This paper proposed an innovative composite sandwich structure incorporating GFRP skins, a cold formed profiled steel plate and a light weight balsa wood core. The interaction between the different components was connected by stainless steel core rivets. Three-point bending tests were conducted on eleven specimens to investigate the parameters (shear span to depth (a/d) ratio, thickness of cold formed profiled steel plate and spacing of the stainless steel core rivets) effect on the performance (deflection, ultimate load bearing capacity, and failure modes) of the new proposed structure. The test findings indicate that a reduction in ultimate load-bearing capacity ranging from 13% to 41%, accompanied by an escalation in deflection between 1.7 and 13.9 times, as the a/d ratio ranges from 1 to 6. All beams experienced failure at deflections ranging from span/114 to span/50. Specifically, specimens displayed core shear failure for a/d ratios <= 4, transitioning to top skin compression failure at an a/d ratio of 6. Compared to specimens without cold formed profiled steel plate reinforcement, the load bearing capacity of the new proposed composite structure at serviceability limit states and ultimate limit states was increased by 68%-194% and 53%-83%, respectively. Moreover, the reinforcement of the stainless steel core rivets can ensure the coordinated working of different components, and the smaller the spacing, the better the working effect. Finally, an analytical model was developed to account for the impact of cold-formed profiled steel plates on specimen stiffness and load-bearing capacity. This model was subsequently validated through experimental results. Both the experimental and theoretical analysis verified the favorable performance of the proposed new composite structure.

Mechanics Properties of Paulownia Core Sandwich Composites

Mechanical Behavior of Composite Column Reinforced Paulownia Wood Sandwich

EXPERIMENTAL RESEARCH ON THE FLEXURAL PROPERTIES OF PAULOWNIA WOOD CORE COMPOSITE SANDWICH PANEL REINFORCED BY LATTICE WEBS

Densification of fast-growing paulownia wood for tough composites with stab resistance

EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE

The Flexural Behaviour of Composite Sandwich Beams with a Lattice-Web Reinforced Wood Core

Bending properties of U-shaped FRP composite sandwich panels

Experimental Study on Bending Performance of Composite Sandwich Panel with New Mixed Core

Flexural performance test of carbon fiber reinforced composite sandwich beams with cedarwood core

Experimental Study on the Flexure Property of Bamboo-Wood-gfrp Sandwich Beams

Development of an innovative composite sandwich matting with GFRP facesheets and wood core

Mechanical Properties of Sandwich Composites Made of FRP Panels and Strengthened Foam Cores

Deformation and Failure Behavior of Wooden Sandwich Composites with Taiji Honeycomb Core under a Three-Point Bending Test

Modification of Grooved Paulownia Wood Sandwich

Design and compressive behavior of a wood-based pyramidal lattice core sandwich structure

Fabrication and Mechanical Properties of Composite Pyramidal Truss Core Sandwich Panels with Novel Reinforced Frames

Structural analysis and strength-to-weight optimization of wood-based sandwich composite with honeycomb core under three-point flexural test

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure

Three-point bending tests on composite sandwich structure with balsa wood core and fiberglass faces for glider design

Bending Performance of GFRP-wood Sandwich Beams with Lattice-Web Reinforcement in Flatwise and Sidewise Directions

Mechanical Properties of the Composite Sandwich Structures with Cold Formed Profiled Steel Plate and Balsa Wood Core