Abstract:Numerous studies have demonstrated that under low-velocity, low-energy impact conditions, although the surface damage to fiber-reinforced composite laminates may be minimal, significant internal damage can occur. Consequently, a progressive damage finite element model was specifically developed for thermoplastic carbon fiber-reinforced composite laminates subjected to low-speed impact loads, with the objective of analyzing the damage behavior of laminates under impacts of varying energy levels. The model utilizes a three-dimensional Hashin criterion for predicting intralayer damage initiation, with cohesive elements based on bilinear traction-separation law for predicting interlaminar delamination initiation, and incorporates a damage constitutive model based on equivalent displacement to characterize fiber damage evolution, along with the B-K criterion for interlaminar damage evolution. The impact response of laminates at energy levels of 5 J, 10 J, 15 J, 20 J, and 25 J was analyzed through numerical simulation, drop-hammer experiments, and XCT non-destructive testing. The results indicated that the simulation outcomes closely correspond with the experimental findings, with both the predicted peak error and absorbed energy error maintained within a 5% margin, and the trends of the mechanical response curves aligning closely with the experimental data. The damage patterns predicted by the numerical simulations were consistent with the results obtained from XCT scans. The study additionally revealed that the impact damage of the laminates primarily stems from interlaminar delamination and intralayer tensile failure. Initial damage typically presents as internal delamination; hence, enhancing interlaminar bonding performance can significantly augment the overall load-bearing capacity of the laminate.

Interface Delamination Damage Mechanism of Paulownia Wood Sandwich Beams under Low-velocity Impact

Low-velocity Impact Damage Analysis in Composite Laminates

Exploration of Several Influence Factors of Low-Velocity Impact Damage on Composite Laminates

ANALYSIS OF RESIDUAL COMPRESSIVE STRENGTH OF IMPACT DAMAGE COMPOSITE

Delamination Propagation Manipulation of Composite Laminates under Low-Velocity Impact and Residual Compressive Strength Evaluation

Numerical Investigation on the Repeated Low-Velocity Impact Behavior of Composite Laminates

A Progressive Damage Model of Composite Laminates under Low-Velocity Impact

Impact Resistance of Thin Plain Woven Composite Laminates under High-velocity Small Mass Impact

Finite Element Analysis of a Modified Progressive Damage Model for Composite Laminates under Low-Velocity Impact

Experimental Investigation of Low-Velocity Impact Behavior and CAI on Composite Laminates by Discrete Interleaved Toughening

Investigation of Damage to Thick Composite Laminates under Low-Velocity Impact and Frequency-Sweep Vibration Loading Conditions

Experimental Investigation of the Double Impact Position Effect on the Mechanical Behavior of Low-Velocity Impact in CFRP Laminates

The damage of low-velocity impacted cfrp laminates with different stacking sequences based on micro-mechanics of failure

Predicting Damage Behaviors of Composite Laminates under Multiple Low‐velocity Impacts

Damage Accumulation Mechanism of Composite Laminates Subjected to Repeated Low Velocity Impacts

Delamination prediction in composite laminates under low-velocity impact

Research on Low Velocity Impact Damage of Laminated Composite

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Influence of Various Damage Mechanisms on the Low‐velocity Impact Response of Composite Laminates

Mechanical Behavior of Composite Column Reinforced Paulownia Wood Sandwich

Low-Velocity Impact and Damage Process of Composite Laminates