Abstract:The harsh geological conditions in the northwest region of China, characterized by widespread saline-alkali soil rich in alkali ions, pose a high risk of Alkali-Silica reaction (ASR) in concrete, particularly due to the presence of ASR-active natural river sands. To address ASR hazards, locally applied concrete often employs High-Performance concrete (HPC) prepared with high proportions of mineral admixtures. In this paper, the alkali content is controlled by adding mixed water with NaOH to the initial configuration of concrete, and three different alkali content states are set up. A 1 mol/L NaOH solution was used to simulate alkaline conditions, and HPC specimens were immersed for an extended period to investigate the effects of equivalent alkali content, immersion time, concrete strength, and admixture on the flexural mechanical properties of HPC under the condition of long-term alkali immersion. Results indicate that, the strength grade was positively correlated with the flexural strength of HPC, but the alkali content was negatively. Initial immersion significantly enhances strength, followed by a gradual decline after long-term immersion. Among three types of admixture addition methods, the impact on flexural strength of HPC immersed in alkaline solution for 10 years follows the order: Double doped air entraining agent and rust inhibitor is greater than single doped air entraining agent is greater than single doped rust inhibitor. In the process of macroscopic test, it is difficult to observe the variation rule of stress and strain in detail, only the final aggregate failure mode can be analyzed. In order to analyze the strain change of the specimen and the failure process of the aggregates more accurately, a three-dimensional random aggregate concrete mesoscopic model was established, and equations relating microhardness to the mechanical properties of concrete components were derived from statistical analysis, providing a basis for parameter selection in the model. Results demonstrate that with increasing strength, the occurrence time of initial cracks is delayed, and the ratio of cracks bypassing aggregates (cracks develop along the ITZ between aggregate and mortar until complete failure) decreases, and the ratio of cracks penetrating aggregates (cracks develop directly through aggregates in an almost vertical direction) increases.

Microstructure and Durability of RC in Boric Acid

Study on the Behavior and Durability of Reinforced Concrete in Boric Acid Environment

Behavior of Reinforced Concrete Subjected to Boric Acid Corrosion of Nuclear Power Plant

Characterizations and Quantification of Freeze-Thaw Behaviors of Recycled Brick Aggregate Concrete

Study on the Influences of Boric Acid on the Corrosion of Concrete

Effects of Environmental Water-Level Changes and Bidirectional Electromigration Rehabilitation on Durability of Concrete

Effecting Coefficients for Concrete Structure Durability Design Index

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Corrosion Resistance of Cr-bearing Rebar in Concrete with Chloride Ion Content

Study of acid-resistant behavior of hydroxylated hexagonal boron nitride/isobutyltriethoxysilane composite coatings on sulfoaluminate concrete surfaces

Heat-induced morphology-dependent corrosion of solid boric acid on carbon steel

Anti-Corrosion Performance of Magnesium Potassium Phosphate Cement Coating on Steel Reinforcement: The Effect of Boric Acid

Investigation of Crevice Corrosion Behavior of HRB355 Steel in 3.5% NaCl solution using Coupled multi-electrode arrays

Durability Performance of Basalt Fiber-Reinforced Concrete Subjected to Sulfate–Magnesium Combined Attack

The flexural mechanical properties and mesoscopic mechanisms of fracture failure of HPC with ASR inhibition measures under prolonged alkaline solution immersion

Corrosion Onset Associated with the Reinforcement and Secondary Phases in B4C-6061Al Neutron Absorber Material in H3BO3 Solution

Mechanical properties of refractory castables bonded with hydratable magnesium carboxylate-boric acid

Corrosion Resistance of Cr-bearing Rebar in Simulated Concrete Pore Solutions

Enhancing Durability of Concrete in Saline Soil with Nano-CaCO3 Modification: Investigation and Reliability Analysis

Investigation of HRB335 steel Corrosion in Concrete in Chloride-Containing Sulfate Solution Using Electrochemical Method

Chloride diffusion behavior and microstructure of basalt-polypropylene hybrid fiber reinforced concrete in salt spray environment