Abstract:Nano-boron nitride (h-BN) has excellent physical and mechanical properties. Due to its stable chemical performance, the improvement effect on the properties of cement-based materials was limited. Therefore, the chemical modification method was used to prepare functional h-BN to improve its application potential in cement-based materials in this paper. The hydroxylated nano-boron nitride (h-BN-OH) was prepared by modified pristine h-BN with saturated sodium hydroxide (NaOH). The effects of h-BN-OH after ultrasonic dispersion for 10 min, 20 min, 30 min and 40 min on the setting time, fluidity, resistivity, mascroscopic strength and microscopic Young's modulus of hydration products of ordinary Portland cement were investigated. Fourier transform infrared spectroscopy (FTIR) test results showed that h-BN-OH had obvious hydroxyl infrared characteristic peaks. After adding h-BN-OH into cement paste, the initial and final setting time of cement paste was shortened 6.44–15.34% and 5.05–13.00%, respectively; the fluidity was reduced 9.86–22.79%, and the resistivity was increased 7.14–25.96%. Meanwhile, the compressive strength of cement paste and the microscopic Young's modulus of hydration products were significantly improved 10.82–40.85% and 9.90–31.01%, respectively. The main reasons were as follows: (1) The dispersion effect and stability of h-BN-OH in cement pore solution were better than that of pristine h-BN, and the hydroxyl group grafted on the h-BN-OH provided nucleation sites for the growth of calcium-silicate hydrate (C–S–H) gel. (2) The hydroxyl groups grafted on the h-BN-OH can absorb Ca 2+ , resulting the polymerization degree ( n c ) and medium chain length (MCL) of C–S–H gel increased. The formation of C–S–H gel network structure was accelerated by the increasing proportion of Q 3 . (3) The pore structure of cement hydration products was significantly optimized.

Study of acid-resistant behavior of hydroxylated hexagonal boron nitride/isobutyltriethoxysilane composite coatings on sulfoaluminate concrete surfaces

Sulphate attack resistance of high-performance concrete under compressive loading

Study on the Behavior and Durability of Reinforced Concrete in Boric Acid Environment

Acid Radical Tolerance of Silane Coatings on Calcium Silicate Hydrate Surfaces in Aggressive Environments: The Role of Nitrate/Sulfate Ratio

Effect of Lithium Silicate Composite Sol on the Properties of Concrete Surface

Microstructure and Durability of RC in Boric Acid

Preparation of TEOS-GPTMS-PDMS Hybrid Material and Its Application in the Protection of Concrete

Behavior of Reinforced Concrete Subjected to Boric Acid Corrosion of Nuclear Power Plant

The Wetting Behavior of Water Droplets on Silane and Silane/GO-Modified Ettringite Surfaces: Insights into Molecular Dynamics Simulations

Effect of Matrix Modification on Durability of Cementitious Composites in an Acid Rain Environment

Effect of Isobutyl-Triethoxy-silane Penetrative Protective Agent on the Carbonation Resistance of Concrete

Performance of high-belite calcium sulfoaluminate cement subjected to hydrochloric acid and sulfuric acid

Effect of sulfate attack on multiple interfacial transition zones of high-belite sulfoaluminate cement recycled concrete

Study on the Resistance of Concrete to High-Concentration Sulfate Attack: A Case Study in Jinyan Bridge

Design, Preparation, and Performance of a Novel Organic–inorganic Composite Coating with High Adhesion and Protection for Concrete

A Study on the Properties of Composite Modified Mortar with Styrene–Butadiene Rubber Latex and Silica Fume

Superhydrophobic anticorrosive coating for concrete through in-situ bionic induction and gradient mineralization

Octadecylamine-functionalized hexagonal boron nitride nanosheets toward highly anti-corrosive epoxy composite coatings

Effect and mechanism analysis of hydroxylated nano-boron nitride on workability and multi-scale mechanical properties of cement paste

The new insights towards smart pH-responsive anticorrosion coating based on HNTs carrying synergistic inhibitors: Experimental and molecular simulation

Amino-silane co-functionalized h-BN nanofibers with anti-corrosive function for epoxy coating