Abstract:This article reports a novel laser-induced micro-fabrication method and its monitoring system for three-dimensional (3D) microstructures. The mechanism of the method is that a small zone of thermoplastic material melted by laser heating grows in liquid surrounding environment, solidifying into a convex microstructure, such as micro-dot or micro-pillar. A laser diode (808 nm) with maximum power output of 130 mW is used as power source, and a kind of paraffin mixed with stearic acid and paint serves as the thermoplastic material for 3D microstructure formation experiments. A light microscope system consisting of a charge-coupled device (CCD) and a computer is utilized to realize real-time observation of the micro-fabricating process. The distribution of local temperature rise on material surface created by laser irradiation is simulated. The effects of liquid environment on microstructure formation have been theoretically analyzed and experimentally studied. Experiments are further carried out to investigate the relationship between laser spot and fabricated microstructures. The results indicate that the widths of microdots or micro-pillars are mostly determined by the size of focal spot, and their heights increase with the enlargement of laser power density. With this method, a micro-dot array of Chinese characters meaning "China" has been successfully fabricated through computer programming. This method has the advantages of implementing direct, mask-less, real-time and inexpensive 3D microstructure fabrication. Therefore, it would be widely applied in the fields of micro/nano-technology for practical fabrication of different kinds of 3D microstructures. Microsc. Res. Tech. 72:717-722, 2009. (C) 2009 Wiley-Liss, Inc.

Direct Writing Micro/Nano Structures on PZT Wafer by Laser Micromaching

High Throughput Laser Nano Direct Writing Technique

Laser Direct Writing Using Submicron-Diameter Fibers.

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Processing of PZT Microstructures

Ablation and Micromachining of PZT Thick Films Using Femtosecond Laser

Laser Direct Writing for Micromachining of Freeform Surface on n-Type GaAs via Photoelectrochemical Etching

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Micromachining of PMN-PT Crystals with Ultrashort Laser Pulses

Precise and Smooth Structure on Inp Fabricated by Femtosecond Laser Direct Writing-Assisted Wet Etching

Structure and Electrical Properties of PMN-PZT Micro-Actuator Deposited by Tape-Casting Process

Resonant-Typed Microscanners Fabricated By Hybrid Pzt Deposition Process On Soi Wafers

Lost Silicon Mold Process for Pzt Microstructures

Direct Write Assembly of 3-Dimensional Structures with Aqueous-Based Piezoelectric Inks

PZT Film and Si Substrate Two-Layer System Patterning Morphology by Femtosecond Pulsed Laser

Direct Write Assembly of Three-dimensional PZT Woodpile Structure

Fabrication of PZT microdevices using a high-yield sol-gel process

Study on Fabrication and Properties for a Novel Micro-actuated Element

Deep Reactive Ion Etching of PZT Ceramics and PMN-PT Single Crystals for High Frequency Ultrasound Transducers

Piezoelectric Ceramics Micro-displacement Stage Suitable for Nano-second Laser Micro-machining

Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures