Abstract:The novelty of the work lies in the design and development of a significantly low-cost lead zirconate titanate (PZT) ink similar in its electrical properties to its original solid materials, which can be used for 3-D printing to print electronic circuits, shape memory, and devices quickly. The Zr/Ti=52/48 ratio was achieved during the solid-state reaction to create the PZT powder. XRD, FT-IR, and SEM characterized the synthesized material. The PZT powder was found to form in a tetragonal phase. The PZT powder was used to prepare PZT ink with a 13 % Wt/Wt solid content composition. The ink's rheological characteristics and physical properties, such as particle size distribution, surface tension, viscosity, and electrical properties, were studied. Dielectric properties like dielectric constant (ε / ) and dielectric loss (ε") indicate the poly-dispersive nature of the material. The temperature-dependent dielectric constant (ε / ) curve indicates relaxor behavior with a maximum at high temperatures. The poly-dispersive nature of the material was analyzed using Cole-Cole plots. The frequency dependence of AC conductivity follows the universal power law. The temperature dependence of dc-conductivity follows the Arrhenius law, with an activation energy of 0.14 eV at lower temperatures and 0.85 eV at higher temperatures. The electrical conductance study showed that PZT ceramic can be used in electronic circuits because of its high resistivity value and small temperature coefficient of resistance. The piezoelectric measurement displays d33 as 129 pC/N at room temperature

Direct Write Assembly of Three-dimensional PZT Woodpile Structure

Direct Write Assembly of 3-Dimensional Structures with Aqueous-Based Piezoelectric Inks

Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures

Direct-write Assembly of Ceramic Three-dimensional Structures Based on Photosensitive Inks

Direct Writing of Three-Dimensional Woodpile BaTiO3 Structures

Preparation, structural, electrical, and ferroelectric properties of solid and lead zirconium titanate ink

Direct Ink Writing of Three-Dimensional (K, Na)NbO3-Based Piezoelectric Ceramics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Direct Writing Micro/Nano Structures on PZT Wafer by Laser Micromaching

Effect of the slurry composition on the piezoelectric properties of PZT ceramics fabricated via materials extrusion 3D printing

Fabrication and Characterization of Direct-Written 3D TiO 2 Woodpile Electromagnetic Bandgap Structures

3D printing of lead zirconate titanate piezoelectric ceramics via digital light processing (DLP)

Lead zirconate titanate ceramics with aligned crystallite grains

Processing of PZT Microstructures

Direct Write Printing of Three-dimensional Photocatalytic TiO2 Structures

Piezoelectric properties of the 1-3 type porous lead zirconate titanate ceramics

Three-dimensional piezoceramic sheets via mold-assisted sintering as 3D energy transducers

Direct Ink Writing of Special-Shaped Structures Based on Tio2 Inks

Excellent Uniformity and Properties of Micro-Meter Thick Lead Zirconate Titanate Coatings with Rapid Thermal Annealing

Processing and characterization of lead zirconate titanate nanopowders by a simple water-based sol-gel method

Porous PZT Ceramics with High Hydrostatic Figure of Merit and Low Acoustic Impedance by TBA-Based Gel-Casting Process