Abstract:This work introduces a versatile, reconfigurable direct ink writing (DIW) manufacturing method in tandem with a two‐stage curing hybrid ink designed to fabricate high‐strength, self‐supporting parts in unconventional printing spaces such as underneath a build surface or horizontally. To fabricate on existing surfaces, the designed ink consists of a photopolymer and an epoxy capable of curing at ambient temperatures. Fabrication of structures in unstructured environments is a promising field to expand the application spaces of additive manufacturing (AM). One potential application is to add new components directly onto existing structures. Herein, a versatile, reconfigurable direct ink writing (DIW) manufacturing method is developed in tandem with a two‐stage hybrid ink designed to fabricate high‐strength, self‐supporting parts in unconventional printing spaces such as underneath a build surface or horizontally. This two‐stage hybrid DIW ink combines a photopolymer and a tough epoxy resin. The photopolymer can cure rapidly to enable layer‐by‐layer printing of complex structures. It also possesses adequate adhesion to allow the fabrication of large volume structures on a diversity of substrates including acrylic, wood, glass, aluminum, and concrete. The epoxy component can cure after 72 h in ambient conditions with further increased adhesion strengths. The capabilities of the reconfigurable DIW extrusion nozzle method to print complex structures in inverted and horizontal environments are demonstrated. Finally, via addition of DIW‐deposited conductive paths, a functional 3D‐printed structure capable of in situ deformation monitoring is created. This work has the potential to be used for applications such as appending new parts to existing structures for increasing functionality, repair, and structure health monitoring.

Direct-write Assembly of Ceramic Three-dimensional Structures Based on Photosensitive Inks

Direct Ink Writing of Special-Shaped Structures Based on Tio2 Inks

Direct Write Assembly of 3-Dimensional Structures with Aqueous-Based Piezoelectric Inks

Direct Write Assembly of Three-dimensional PZT Woodpile Structure

Direct Write Printing of Three-dimensional Photocatalytic TiO2 Structures

Direct Writing of Three-Dimensional Woodpile BaTiO3 Structures

Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures

3D printing of unsupported multi-scale and large-span ceramic via near-infrared assisted direct ink writing

Fabrication Of 3d Photocatalytic Alpha-Fe2o3 Structure Using Direct Ink Writing Method

Direct-ink-writing (DIW) 3D printing functional composite materials based on supra-molecular interaction

Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures

UV-Curing Assisted Direct Ink Writing of Dense, Crack-Free, and High-Performance Zirconia-Based Composites With Aligned Alumina Platelets

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Direct ink writing of aluminum-phosphate-bonded Al2O3 ceramic with ultra-low dimensional shrinkage

Unstructured Direct Ink Write 3D Printing of Functional Structures with Ambient Temperature Curing Dual‐Network Thermoset Ink

A novel composite binder design for direct ink writing alumina-based ceramics with enhanced strength at low sintering temperature

Direct Ink Writing of Mineral Materials: A review

Three-Dimensional Printing of Yttrium Oxide Transparent Ceramics via Direct Ink Writing

Direct 4D printing of gradient structure of ceramics

Recent progress of alumina ceramics by direct ink writing: Ink design, printing and post-processing