Abstract:Solid oxide fuel cells (SOFCs) can be used for the high-efficiency conversion of chemical energy into electricity. The exploration of new oxide anodes as alternatives to conventional Ni(O), aims to enhance coking resistance and the oxidation–reduction (redox) stability of the anode. An n-type semiconductor with electron charge carriers will be conducive to the electric conductivity, σ , under fuel conditions, but the research on n-type oxide electrodes is limited mostly to perovskite-type titanate that requires very high temperature and low oxygen partial pressure to provide a decent σ . Transparent conductive oxides (TCOs) with a superior σ even at room temperature are widely explored for electronic devices, but they have never been studied as an alternative oxide anode of an SOFC at a reduced temperature. An n-type TCO type material ZnGa 2 O 4 (ZGO) that could be reduced at a temperature below 700 °C was used as the anode for the oxidation of H 2 and hydrocarbon (ethanol and propane) at ≤650 °C. ZGO provided a high σ of 1.5 and 0.33 S cm −1 at 700 °C and 600 °C, respectively, and the cell with a ZGO anode and Sc 0.18 Ce 0.01 Zr 0.81 O 2− δ electrolyte showed a high redox stability. The performance of the cell with a ZGO/GDC (Gd 2 O 3 doped ceria) anode could be enhanced by the infiltration of 1% Ni, imparting a peak power of 574 mW cm −2 at 650 °C and a stable cell performance of 300 mW cm −2 at 600 °C for 300 hours. The cell was also found to be relatively stable under carbonaceous fuel, suppressing carbon deposition at 600 °C. This work provided a new avenue of designing an n-type oxide anode that could be reduced in situ under the fuel condition of a low-temperature SOFC.

A Reduced Temperature Solid Oxide Fuel Cell with Nanostructured Anodes

Nanostructured Thin Solid Oxide Fuel Cells With High Power Density

ZnO/NiO Nanocomposite Electrodes for Low-Temperature Solid Oxide Fuel Cells

Scandia-stabilized Zirconia-Impregnated (la, Sr)MnO 3 Cathode for Tubular Solid Oxide Fuel Cells

High Performance Solid-Oxide Fuel Cell: Opening Windows to Low Temperature Application

High-Performance Low-Temperature Solid Oxide Fuel Cell with a Pt@C–Ni 0.8 Co 0.15 Al 0.05 LiO 2−δ Composite Cathode

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

A Micro-Nano Porous Oxide Hybrid for Efficient Oxygen Reduction in Reduced-Temperature Solid Oxide Fuel Cells.

A Solid Oxide Cell Yielding High Power Density below 600 °C

A new solid oxide fuel cell design based on thin film electrolytes

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

High performance low temperature solid oxide fuel cells with novel electrode architecture

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

High-performance Solid Oxide Fuel Cells with Fiber-Based Cathodes for Low-Temperature Operation

High Performance Transition Metal Oxide Composite Cathode for Low Temperature Solid Oxide Fuel Cells

Metal Supported Solid Oxide Fuel Cells with Infiltrated Nanoelectrodes

Transparent conductive oxide type materials as the anode of solid oxide fuel cells at a reduced temperature

Novel Nano-Structured Pd+yttrium Doped ZrO2 Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Preparation of SOFC Anodes at Lower Temperature with Boosted Electrochemical Performance

Novel architectured metal-supported solid oxide fuel cells with Mo-doped SrFeO3−δ electrocatalysts