Abstract:Solid oxide fuel cells (SOFCs) can be used for the high-efficiency conversion of chemical energy into electricity. The exploration of new oxide anodes as alternatives to conventional Ni(O), aims to enhance coking resistance and the oxidation–reduction (redox) stability of the anode. An n-type semiconductor with electron charge carriers will be conducive to the electric conductivity, σ , under fuel conditions, but the research on n-type oxide electrodes is limited mostly to perovskite-type titanate that requires very high temperature and low oxygen partial pressure to provide a decent σ . Transparent conductive oxides (TCOs) with a superior σ even at room temperature are widely explored for electronic devices, but they have never been studied as an alternative oxide anode of an SOFC at a reduced temperature. An n-type TCO type material ZnGa 2 O 4 (ZGO) that could be reduced at a temperature below 700 °C was used as the anode for the oxidation of H 2 and hydrocarbon (ethanol and propane) at ≤650 °C. ZGO provided a high σ of 1.5 and 0.33 S cm −1 at 700 °C and 600 °C, respectively, and the cell with a ZGO anode and Sc 0.18 Ce 0.01 Zr 0.81 O 2− δ electrolyte showed a high redox stability. The performance of the cell with a ZGO/GDC (Gd 2 O 3 doped ceria) anode could be enhanced by the infiltration of 1% Ni, imparting a peak power of 574 mW cm −2 at 650 °C and a stable cell performance of 300 mW cm −2 at 600 °C for 300 hours. The cell was also found to be relatively stable under carbonaceous fuel, suppressing carbon deposition at 600 °C. This work provided a new avenue of designing an n-type oxide anode that could be reduced in situ under the fuel condition of a low-temperature SOFC.

High Performance Solid-Oxide Fuel Cell: Opening Windows to Low Temperature Application

Efficient strategy to boost the electrochemical performance of yttrium stabilized zirconia electrolyte solid oxide fuel cell for low-temperature applications

High-performance Solid Oxide Fuel Cells with Fiber-Based Cathodes for Low-Temperature Operation

Advances in Solid Oxide Fuel Cell Technologies: Lowering the Operating Temperatures Through Material Innovations

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Thin-film solid oxide fuel cell with high performance at low-temperature

Recent Advances to the Development of Low‐Temperature Solid Oxide Fuel Cells

Nanostructured Thin Solid Oxide Fuel Cells With High Power Density

High-Performance Low-Temperature Solid Oxide Fuel Cell with a Pt@C–Ni 0.8 Co 0.15 Al 0.05 LiO 2−δ Composite Cathode

High Performance Yttria-Stabilized Zirconia Based Intermediate Temperature Solid Oxide Fuel Cells with Double Nano Layer Composite Cathode

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

A Reduced Temperature Solid Oxide Fuel Cell with Nanostructured Anodes

Transparent conductive oxide type materials as the anode of solid oxide fuel cells at a reduced temperature

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

A new solid oxide fuel cell design based on thin film electrolytes

Semiconductor Fe-doped SrTiO3-δ Perovskite Electrolyte for Low-Temperature Solid Oxide Fuel Cell (LT-SOFC) Operating below 520 °C

High performance low temperature solid oxide fuel cells with novel electrode architecture

Composite electrolyte used for low temperature SOFCs to work at 390°C

Impedance analysis of thin YSZ electrolyte for low-temperature solid oxide fuel cells