Abstract:Solid oxide fuel cells (SOFCs) can be used for the high-efficiency conversion of chemical energy into electricity. The exploration of new oxide anodes as alternatives to conventional Ni(O), aims to enhance coking resistance and the oxidation–reduction (redox) stability of the anode. An n-type semiconductor with electron charge carriers will be conducive to the electric conductivity, σ , under fuel conditions, but the research on n-type oxide electrodes is limited mostly to perovskite-type titanate that requires very high temperature and low oxygen partial pressure to provide a decent σ . Transparent conductive oxides (TCOs) with a superior σ even at room temperature are widely explored for electronic devices, but they have never been studied as an alternative oxide anode of an SOFC at a reduced temperature. An n-type TCO type material ZnGa 2 O 4 (ZGO) that could be reduced at a temperature below 700 °C was used as the anode for the oxidation of H 2 and hydrocarbon (ethanol and propane) at ≤650 °C. ZGO provided a high σ of 1.5 and 0.33 S cm −1 at 700 °C and 600 °C, respectively, and the cell with a ZGO anode and Sc 0.18 Ce 0.01 Zr 0.81 O 2− δ electrolyte showed a high redox stability. The performance of the cell with a ZGO/GDC (Gd 2 O 3 doped ceria) anode could be enhanced by the infiltration of 1% Ni, imparting a peak power of 574 mW cm −2 at 650 °C and a stable cell performance of 300 mW cm −2 at 600 °C for 300 hours. The cell was also found to be relatively stable under carbonaceous fuel, suppressing carbon deposition at 600 °C. This work provided a new avenue of designing an n-type oxide anode that could be reduced in situ under the fuel condition of a low-temperature SOFC.

ZnO/NiO Nanocomposite Electrodes for Low-Temperature Solid Oxide Fuel Cells

High Performance Transition Metal Oxide Composite Cathode for Low Temperature Solid Oxide Fuel Cells

High-Performance Low-Temperature Solid Oxide Fuel Cell with a Pt@C–Ni 0.8 Co 0.15 Al 0.05 LiO 2−δ Composite Cathode

Nanocomposite Electrode Materials for Low Temperature Solid Oxide Fuel Cells Using the Ceria-Carbonate Composite Electrolytes

A Reduced Temperature Solid Oxide Fuel Cell with Nanostructured Anodes

Study on Zinc Oxide-Based Electrolytes in Low-Temperature Solid Oxide Fuel Cells

Development of Trimetallic Ni-Cu-Zn Anode for Low Temperature Solid Oxide Fuel Cells with Composite Electrolyte

Transparent conductive oxide type materials as the anode of solid oxide fuel cells at a reduced temperature

Nanostructured Thin Solid Oxide Fuel Cells With High Power Density

Metal Supported Solid Oxide Fuel Cells with Infiltrated Nanoelectrodes

Improved Ionic Transport Using a Novel Semiconductor Co0.6Mn0.4Fe0.4Al1.6O4 and Its Heterostructure with Zinc Oxide for Electrolyte Membrane in LT-CFCs

Study of CuNiZnGdCe-Nanocomposite Anode for Low Temperature SOFC

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Efficient strategy to boost the electrochemical performance of yttrium stabilized zirconia electrolyte solid oxide fuel cell for low-temperature applications

A Novel High Performance Composite Anode with in Situ Growth of Fe-Ni Alloy Nanoparticles for Intermediate Solid Oxide Fuel Cells

Impregnated Nd2NiO4+- Scandia Stabilized Zirconia Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Fabrication and Study on Ni1−xFexO-YSZ Anodes for Intermediate Temperature Anode-Supported Solid Oxide Fuel Cells

Novel Nano-Structured Pd+yttrium Doped ZrO2 Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Preparation of SOFC Anodes at Lower Temperature with Boosted Electrochemical Performance

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Electrochemical properties of Ni0.4Zn0.6 Fe2O4 and the heterostructure composites (Ni–Zn ferrite-SDC) for low temperature solid oxide fuel cell (LT-SOFC)