Abstract:Proton conductor-based solid oxide fuel cells (SOFCs) and electrolysis cells (SOECs) are receiving increasing attention because of their potential for operation at intermediate temperatures (400 - 600 o C) with high energy efficiency at low cost. In addition, water is formed/provided on the air electrode side of proton-conducting cells, effectively avoiding fuel dilution and nickel oxidation problems associated with oxide-ion conductor-based cells. To date, doped barium cerates-based perovskite oxides are the most widely adopted proton conducting electrolytes due to their desired electrochemical properties. To achieve high proton conductivity, acceptor doping with rare earth elements is a commonly used strategy, which is critical to the formation of protonic defects. Although many trivalent elements have been studied as dopants in the barium cerate family and reasonable electrochemical performance has been demonstrated, the effect of acceptor dopants on other properties of electrolyte materials, especially in single cells under operating conditions, is yet to be studied in detail. In this presentation, we will report our recent progress in the development of a series of acceptor-doped proton-conducting electrolytes. The results reveal that conductivity, transference number, chemical stability, and compatibility with NiO are all closely correlated with dopant size. In particular, the reactivity with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, an optimized electrolyte shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, reversible protonic ceramic electrochemical cells (R-PCECs) based on the optimized electrolyte demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.2 W cm -2 at 600 o C in the fuel cell mode and a high current density of 2.0 A cm -2 at 1.3 V and 600 o C in the steam electrolysis mode while maintaining long-term durability for over 1000 h without obvious degradation.

A Solid Oxide Cell Yielding High Power Density below 600 °C

A Reduced Temperature Solid Oxide Fuel Cell with Nanostructured Anodes

High-conductivity electrolyte with a low sintering temperature for solid oxide fuel cells

High Performance Solid-Oxide Fuel Cell: Opening Windows to Low Temperature Application

High-Performance, Ceria-Based Solid Oxide Fuel Cells Fabricated at Low Temperatures

Lowering the Temperature of Solid Oxide Electrochemical Cells Using Triple‐Doped Bismuth Oxides (Adv. Mater. 5/2024)

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Lowering the operating temperature of protonic ceramic electrochemical cells to <450 °C

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

Low-temperature Solid Oxide Fuel Cells Based on Tm-doped SrCeO2-δ Semiconductor Electrolytes

Thin Yttria-Stabilized Zirconia Electrolyte and Transition Layers Fabricated by Particle Suspension Spray

High performance low temperature solid oxide fuel cells with novel electrode architecture

High performance solid oxide fuel cells with electrocatalytically enhanced (La, Sr)MnO3 cathodes

Performance and Durability of Metal-Supported Solid Oxide Electrolysis Cells at Intermediate Temperatures

An Acidity-Regulated Double Perovskite Cathode for Efficient and Durable Power Generation of Intermediate-Temperature Solid Oxide Fuel Cells

Solid oxide electrolyzer positive electrodes with novel microstructure show unprecedented stability at high current densities

Highly Conductive and Stable ErxCe0.05Bi0.95-xO1.5+δ Solid Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Solid‐Oxide Fuel Cells: Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating Below 500 °C (Adv. Mater. 48/2017)

ZnO/NiO Nanocomposite Electrodes for Low-Temperature Solid Oxide Fuel Cells

A High-Performing Proton-Conducting Solid Oxide Fuel Cell with Layered Perovskite Cathode in Intermediate Temperatures