Abstract:The corrosion and electrochemical behaviour of carefully prepared ultra-lightweight magnesium-lithium (Mg-Li) alloys were investigated and compared. The alloy compositions studied were selected to provide the ability to compare unique microstructures and crystal structures, which arise from specific alloying additions of Li. Mg-4% Li is hexagonal closed-packed (HCP) alloy with Li in solid solution of Mg (alpha-Mg); Mg-14% Li is a fully solid solution BCC (beta-Li) alloy, whilst Mg-7.5% Li is a duplex (alpha-Mg thorn beta-Li) alloy. Testing in 0.1 M NaCl revealed that the corrosion performance and electrochemical response of the Mg-Li system evolved with the composition and crystallographic structure. For Mg-4% Li alloy, filiform-like corrosion morphology can be observed on the corroded surface, whilst a mixture of filiform-like corrosion to the alpha-Mg and localised dissolution of b-Li existed on the corroded surface of Mg-7.5% Li alloy. In the case of the BCC structured Mg-14% Li alloy, minor pitting was observed, concomitant with a generally low corrosion rate (particularly low corrosion rate for typical Mg alloys) and an increasing corrosion resistance with exposure time were also revealed. A combination of exposure testing inclusive of hydrogen collection and mass loss, in addition to potentiodynamic polarisation and impedance spectroscopy elucidated and quantified the corrosion performance of three differently structured Mg-Li alloys. It revealed that in spite of being composed of reactive elements of Mg and Li, the formation of beta-Li phases with BCC structure could facilitate the formation of a highly protective surface film which results in a predictable and consistently low corrosion rate of the Mg-14% Li alloy. (C) 2017 Elsevier Ltd. All rights reserved.

STUDY ON CORROSION OF MEDICAL Mg-Ca AND Mg-Li-Ca ALLOYS

Effect of Alloyed Ca on the Microstructure and Corrosion Behavior of Extruded Mg-Bi-Al-based Alloys

Composition and Microstructure Dependent Corrosion Behaviour of Mg-Li Alloys

In Vitro Degradation and Biocompatibility of Mg-Li-Ca Alloys—the Influence of Li Content

Comparison of Microstructure, Mechanical Property, and Degradation Rate of Mg–1Li–1Ca and Mg–4Li–1Ca Alloys

The Effects of ECAP, Mn and Ca Elements on the Microstructure and Corrosion Properties of Magnesium Alloys Were Investigated

In Vitro Corrosion of As-Extruded Mg–Ca Alloys—the Influence of Ca Concentration

Effects of Microstructure Transformation on Mechanical Properties, Corrosion Behaviors of Mg-Zn-Mn-Ca Alloys in Simulated Body Fluid.

Corrosion Behavior of Mg-Ca-Zn Alloys in Simulated Body Fluid

Microstructure, Mechanical Properties and Corrosion Resistance of a Novel Mg-8Li-5Al-5Ca Alloy

Corrosion and Characterisation of Dual Phase Mg–Li–Ca Alloy in Hank’s Solution: the Influence of Microstructural Features

Microstructure, Mechanical and Bio-Corrosion Properties of Mg–Zn–Zr Alloys with Minor Ca Addition

In Vitro Corrosion of Mg–1.21Li–1.12Ca–1Y Alloy

Effects of Extrusion on Mechanical and Corrosion Resistance Properties of Biomedical Mg-Zn-Nd-xCa Alloys

Corrosion Fatigue Behaviors of Two Biomedical Mg Alloys-Az91d and We43-In Simulated Body Fluid

Effects of Ca on Microstructure, Mechanical and Corrosion Properties and Biocompatibility of Mg–Zn–Ca Alloys

Influence of Microstructure on Corrosion Properties of Mg-6Zn-1Mn-0.5Ca Alloy in Simulated Body Fluid

Corrosion behavior and microstructure of biomedical Mg-Zn-Mn-Gd alloys

Schematic Diagram Illustrating the Corrosion Reaction in Mg-Li-Al-Ca Alloy with and Without Β-Li Phase

The Influence of Zn Content on the Corrosion and Wear Performance of Mg-Zn-Ca Alloy in Simulated Body Fluid

Effect of Al on the Microstructure, Corrosion Behavior and Mechanical Properties of Mg-4Li