Abstract:The microstructure evolution and mechanical properties of biodegradable Mg–3Sn–1Zn–0.5Mn alloys were investigated by the optical microscopy, X-ray diffractometer and a universal material testing machine.The corrosion and degradation behaviors were studied by potentiodynamic polarization method and immersion test in a simulated body fluid（SBF）. It was found that the as-extruded Mg–3Sn–1Zn–0.5Mn alloy has the fine equiaxed grains which underwent complete dynamic recrystallization during the hot extrusion process, with the second phase particles of Mg 2 Sn precipitated on the grain boundaries and inside the grains. The tensile strength and elongation of as-extruded Mg–3Sn–1Zn–0.5Mn alloys were 244 ± 3.7 MPa and 19.3% ± 1.7%, respectively. The potentiodynamic polarization curves in SBF solution indicated the better corrosion resistance of the as-extruded Mg–3Sn–1Zn–0.5Mn alloy in the SBF solution. Immersion test in the SBF solution for 720 h revealed that the corrosion rate of as-extruded Mg–3Sn–1Zn–0.5Mn alloy was nearly 4 ± 0.33 mm/year. The hemolysis rate of as-extruded Mg–3Sn–1Zn–0.5Mn alloy was lower than the safe value of 5% according to ISO 10993-4. As-extruded Mg–3Sn–1Zn–0.5Mn alloy showed good biocompatibility after being implanted into the dorsal muscle and the femoral shaft of the rabbit, and no abnormalities were found after short-term implantation. It was revealed that the as-extruded Mg–3Sn–1Zn–0.5Mn alloy is a promising material for biodegradable implants,which possesses an interesting combination of preferred mechanical properties, better corrosion resistance and biocompatibility.

In vitro corrosion behavior of the extruded Mg–4Zn–1Mn alloy in different physiological solutions for biomedical applications

In vitro degradation performance and biological response of a Mg–Zn–Zr alloy

Corrosion behavior and microstructure of biomedical Mg-Zn-Mn-Gd alloys

Micro-galvanic Corrosion Behavior and Mechanical Properties of Extruded Mg–2Y–1Zn-0.4Zr-0.3Sr Alloys with Different Extrusion Temperament Immersed in Simulated Body Fluids

Microstructure, Mechanical Properties, Corrosion Behavior and Biocompatibility of As-Extruded Biodegradable Mg–3Sn–1Zn–0.5Mn Alloy

Microstructure and in vitro degradation performance of Mg-Zn-Mn alloys for biomedical application

Microstructure, Mechanical Properties and Bio-Corrosion Properties of Mg-Si(-Ca, Zn) Alloy for Biomedical Application

Corrosion Behavior of AZ91D Magnesium Alloy in Three Different Physiological Environments

Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids

In Vitro Degradation Behavior and Cytocompatibility of Mg-6Zn-Mn Alloy

Research on Dynamic Corrosion Behavior and the Microstructure of Biomedical Mg–Y–Zn–Zr–Sr in Simulated Body Fluid Solution after Processing by Solution Treatment

In Vitro and in Vivo Studies on As-Extruded Mg- 5.25Wt.%zn-0.6Wt.%ca Alloy As Biodegradable Metal

Effects of Microstructure Transformation on Mechanical Properties, Corrosion Behaviors of Mg-Zn-Mn-Ca Alloys in Simulated Body Fluid.

Effects of Extrusion on Mechanical and Corrosion Resistance Properties of Biomedical Mg-Zn-Nd-xCa Alloys

Corrosion behavior and mechanical properties of extruded low-alloyed Mg−0.5Bi−0.5Y−0.2Zn alloy

Microstructure, Mechanical Properties, Biocorrosion Behavior, and Cytotoxicity of As-Extruded Mg–Nd–Zn–Zr Alloy with Different Extrusion Ratios

Research of Dynamic Corrosion Behavior, Microstructure, and Biocompatibility of Mg–Zn–Ca–Zr Alloys in Simulated Body Fluid Solution Induced by Zn Element Addition

Alloying and Brushite Coating Improve Corrosion Resistance of Magnesium in a Simulated Physiological Environment

Effect of I-phase Morphology and Microstructure Transformation in Biomedical Mg-3Zn-1Mn-1Y Alloys on Vitro Degradation Behavior in Dynamic Simulated Body Fluid

Corrosion Behavior of Mg-Ca-Zn Alloys in Simulated Body Fluid