Abstract:A sensitivity-enhanced two-dimensional bending sensor using four-core fiber (FCF) transition to realized single-channel demodulation of seven-core fiber Bragg grating (FBG) is proposed. A section of FCF was added between the single-mode fiber (SMF) and the seven-core fiber (SCF), and the thermal diffusion technology (TDT) was used so that the signal of the SMF could be transmitted to the three side cores of the SCF through the FCF. Then, a 45° reflective circular cone (45° RCC) is fabricated at the end of the SCF, enabling the coupling of the symmetrical side core signals of the SCF. By inscribing the FBGs with different reflection wavelengths on the side cores of the SCF, the signals of each side core can be distinguished during single-channel demodulation. Monitoring the reflection wavelength shifts of the FBGs on the SCF can realize two-dimensional bending measurements. Furthermore, through the differential operation of the symmetrical side cores, the bending sensitivity can be enhanced while eliminating temperature crosstalk. The proposed sensor with high integration, high sensitivity, and reduced crosstalk, is expected to be applied in the field of structural inspection or interventional medical treatment.

Bending-induced Sensing Sensitivity in Single-Longitude-mode DBR Fiber Laser

Highly Sensitive Bending Sensor Based on Er^3+-doped DBR Fiber Laser

Highly sensitive bending sensor based on Er3+-doped DBR fiber laser

Ultra-short cavity distributed bragg reflector Er-doped fiber laser for temperature-insensitive bending measurement

Polarimetric Multilongitudinal‐mode Distributed Bragg Reflector Fiber Laser Sensor for Strain Measurement

Investigation of DBR Fiber Laser Sensing Based on Beat Frequency Interrogation and Its Networking Technique

Directional Bending Sensor Based on LP11 Mode from Few-Mode Ring-Core Fiber with Long-Period Grating

Sensitivity Enhanced Distributed Brillouin Curvature Sensor Based on Erbium-Doped Few-Mode Fiber

Multilongitudinal Mode Fiber Laser for Strain Measurement

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Femtosecond Laser Inscription of Fiber Bragg Grating in Twin-Core Few-Mode Fiber for Directional Bend Sensing

Dual-dip Long-Period Fiber Gratings for Directional Bending Measurement

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

DBR-fiber-laser-based active temperature sensor and its applications in the measurement of fiber birefringence

The Experimental Study Of A Polarization Orthogonal Longitudinal-Mode Distributed Bragg Reflector Fiber Laser

Bend-insensitive Distributed Sensing in Singlemode-Multimode-singlemode Optical Fiber Structure by Using Brillouin Optical Time-Domain Analysis

A novel bend-insensitive long-period fiber grating sensor

Multiparameter Sensor Based on Long-Period Grating in Few-Mode Ring-Core Fiber for Vector Curvature and Torsion Measurement

DBR Fiber Laser Sensor With Polarization Mode Suppression

Fiber Grating Laser Pressure Sensor

Curvature and angle sensor based on LP 21 mode reflected by a four-mode fiber Bragg grating