Abstract:A sensing system for simultaneously measuring strain and temperature is proposed by employing a polarimetric multi-longitudinal mode fiber laser sensor and beat frequency demodulation device. The proposed fiber laser is built with two fiber Bragg gratings and a piece of Erbium-doped-fiber, which act as cavity reflector and gain medium, respectively. Owing to the intrinsic birefringence of fiber, two orthogonal polarization modes experience slight splitting, thus many longitudinal mode beat signals and polarization mode beat signals are generated in the laser cavity. Strain and temperature can be measured simultaneously by monitoring the frequency shift of longitudinal mode beat signal and polarization mode beat signal due to their different responses to strain and temperature. The selection of beat frequency signal pair for improving the laser sensitivity has also been analyzed and investigated experimentally. In addition, the repeatability and stability performances of the proposed laser were also investigated. The proposed sensing system just uses one polarimetric fiber laser sensor and one beat frequency demodulation equipment, and it shows distinctive advantages of simple structure, portability, high sensitivity, and low cost due to the avoidance of expensive optical detection device for wavelength monitoring.

DBR Fiber Laser Sensor With Polarization Mode Suppression

Polarimetric Multilongitudinal‐mode Distributed Bragg Reflector Fiber Laser Sensor for Strain Measurement

The Experimental Study Of A Polarization Orthogonal Longitudinal-Mode Distributed Bragg Reflector Fiber Laser

DBR-fiber-laser-based active temperature sensor and its applications in the measurement of fiber birefringence

Novel pressure sensor based on distributed Bragg reflector (DBR) fiber laser

Fiber Grating Laser Pressure Sensor

Investigation of DBR Fiber Laser Sensing Based on Beat Frequency Interrogation and Its Networking Technique

Demodulation of a Fiber Bragg Grating Sensor System Based on a Linear Cavity Multi-Wavelength Fiber Laser

Compact polarimetric heterodyning DBR fiber laser sensor with high temperature resistance

Highly Sensitive Bending Sensor Based on Er^3+-doped DBR Fiber Laser

High-Resolution Strain and Temperature Sensor Based on Distributed Bragg Reflector Fiber Laser

Bending-induced Sensing Sensitivity in Single-Longitude-mode DBR Fiber Laser

Highly sensitive bending sensor based on Er3+-doped DBR fiber laser

Demodulation of DBR Fiber Laser Sensors with Speckle Patterns

Polarimetric Multilongitudinal Mode Fiber Laser for Simultaneous Measurement of Strain and Temperature

Ultra-short cavity distributed bragg reflector Er-doped fiber laser for temperature-insensitive bending measurement

Demodulation Of A Fiber Bragg Grating Strain Sensor By A Multi-Wavelength Fiber Laser

Multilongitudinal Mode Fiber Laser for Strain Measurement

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm

Side-Polished DBR Fiber Laser with Enhanced Sensitivity for Axial Force and Refractive Index Measurement