Abstract:This paper proposes a novel approach that employs error amplification and ADC-based dual-mixer time-difference (ADC-based-DMTD) technique for high-precision locking of laser repetition frequency with compact size. This electronic system consists of two main components: a digitized error amplification module (EAM) and an FPGA-based digital frequency locking module (DFLM). The EAM mainly integrates a configurable frequency generator (CFG), a configurable frequency multiplier (CFM) and a mixer to process the laser pulses and a high-stability reference source (e.g., an atomic clock), enabling high-precision locking of pulse lasers operating at different repetition frequencies. By employing frequency multiplication and mixing, the EAM amplifies the laser's frequency error and performs frequency down-conversion, enhancing measurement sensitivity and reducing the hardware requirements of the back-end. The DFLM receives the EAM outputs by using an ADC-based-DMTD method to precisely measure frequency errors, then the digital proportional-integral-derivative (PID) controller provides feedback to achieve accurate frequency locking. Initial testing with a voltage-controlled oscillator (VCO) demonstrated excellent locking performance, achieving an Allan deviation of $9.58 \times 10^{-14}$ at 10 seconds and a standard deviation (STD) of 7.7 \textmu Hz root mean square (RMS) after locking, marking a five-order-of-magnitude stability enhancement. In laboratory experiments with a custom-built femtosecond fiber laser, the system achieved robust locking of the repetition frequency, with a stability improvement from $1.51 \times 10^{-7}$ to $1.12 \times 10^{-12}$ at a 10-second gate time and an STD of 0.43 mHz RMS after locking.

A Multi-Channel Digital Programable Delay Trigger System with High Accuracy and Wide Range

A High‐resolution Hybrid Digital Pulse Width Modulator with Dual‐edge‐triggered Flip‐flops and Hardware Compensation

Prototype development of a three-stage, high-precision, low-jitter, wide-range digital delay generator fully utilizing on-chip resources

High Resolution Digital Pulse Width Modulation Design For Digital Dc-Dc Converter

A field programmable gate array-based timing and control system for the dynamic compression sector

An FPGA-based Timing and Control System for the Dynamic Compression Sector

High-accuracy Control System Based on DDS for Laser Frequency and Its Applications

A Programmable High-Resolution Ultra Fast Delay Generator

Low-cost FPGA-based multi-channel TDC with high resolution and density for time-of-flight detectors

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

A 19.6 ps, FPGA-Based TDC With Multiple Channels for Open Source Applications

Large dynamic range digital delay with sub-picosecond precision

High-precision Pulsed Laser Measuring Distance by Time Delay Method

A Digital and Compact High-Precision Locking System for Pulse Laser Repetition Frequency

A Delay-Line DPWM Architecture With Compensation Module and Delay-Adjustable Unit Based on DLL

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

Picosecond programmable delay line using commercial components for precision timing signal alignment

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

High-Resolution, Multi-Channel FPGA-Based Time-to-Digital Converter

FPGA Vernier Digital-to-Time Converter With 1.58 ps Resolution and 59.3 Minutes Operation Range

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme