A Programmable High-Resolution Ultra Fast Delay Generator

YQ Liu,HD Li,Y Wang,T Xing,H Baghaei,J Uribe,R Farrell,WH Wong

DOI: https://doi.org/10.1109/tns.2003.817412

IF: 1.703

2003-01-01

IEEE Transactions on Nuclear Science

Abstract:This paper presents a high-resolution, small deadtime digital delay method where the performance is independent of the total delay time. We have implemented a small dead-time (50ns) and high-resolution (/spl plusmn/0.9ns) delay generator with delay time up to hundreds of milliseconds. We have proposed a high-resolution whole-body PET with 12 module PMT-quadrant-sharing (PQS) detector design. This high-resolution delay unit is an important part in the new PET electronics where a high-yield-pileup-event-recovery (HYPER) method is used. Using HYPER method, the energy/position signals are generated or digitized at the arrival of the next event(arriving at a random time from present event) if the the present event was piled-up by the next event, so the energy/position signals are no longer synchronized with the leading edge of the triggering signal. To detect a coincidence event by using the HYPER method, the original trigger signal has to be delayed by a fixed time (1.5/spl mu/s for BGO) and a new synchronization process has to be setup between the delayed trigger and the energy/position signals before they can go to the coincidence detection electronics. Each HYPER processor needs one delay generator; there are 48 delay units inside the whole PET system. This high resolution delay generator also can be used in other PET systems where a delay is needed to synchronize the fast timing trigger to the slower integration or detector address outputs; this low timing-jitter delay can also be applied to automatic test equipment and communications.