Abstract:A unified-mode analysis method for modeling symmetric networks is proposed in this paper. Adjusting to the characteristics of Marchand balun circuits, a unified-mode circuit model is constructed by introducing virtual impedance. The tenable condition of a Marchand balun with connecting segments is then derived. The parameter constraint of Marchand balun's input matching is given in a quarter-saddle diagram. Simulated results under different parameter conditions verify the validity of the derived formulas. Based on the derived formulas, the traditional isolation circuit and impedance matching circuit are merged with a Marchand balun to achieve matching for all ports and full-frequency isolation between output ports. A microstrip balun with input and output impedance values of 50 Ω, operating at 1.5 GHz, is simulated, fabricated, and measured. The simulated and measured results of the microstrip balun are in good agreement. When the core parameters remain unchanged, an impedance transformer is inserted in front of the input port of the balun to realize a balun with a topology characterized by flexible impedance transformation. A balun with an input impedance of 35 Ω and different output impedances of 50 Ω and 75 Ω is simulated and fabricated to verify the design concept. Measured results show that an amplitude balance of less than 0.4 dB and a phase balance of less than 3° for a fractional bandwidth of 50%. It should be mentioned that all design equations are closed-form and can be readily employed to design symmetric networks.

Design and Modeling for 6.6ghz IPD Balun

Design of Millimeter-Wave Transformer Balun with Isolation Circuit in Silicon Based Technology

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

Design of Monolithic Broadband Balun Based on Planar-Spiral Inductors

Compact CMOS Baluns for the 4–10 GHz Band Applications

Design of Integrated Differential Balun Circuits

The Design of a New Spiral Inductor Balun Used in RF/MW Based on 0.13&#x03bc;m CMOS Process

1.34-To-16.37 GHz On-Chip Balun Based on Asymmetric Stacked Spiral Transformers

A Broadband Monolithic Balun Based on 0.13μ CMOS m Process Using Planar-Spiral Transformers

A Broadband Monolithic Balun Based on 0.13/spl mu/m CMOS Process Using Planar-Spiral Transformers

Design Analysis of Integrated Passive Device-Based Balun Devices with High Selectivity for Mobile Application

Design and modeling of an on-chip asymmetric tap balun for CMOS millimeter-wave circuits

Research on miniaturized balun in RF front end

Compact 2–18 GHz On‐chip Balun Based on Centrosymmetric Spiral Transformers

Low-loss Balun Design and Compact Modeling for RF/millimeter-wave Circuit Application

Design Of A Miniaturized Low-Profile Archimedean Spiral Antenna With Tapered Balun Transformer

Compact 6.5-28.5 GHz On-Chip Balun with Enhanced Inband Balance Responses

A Unified-Mode Analysis Method for Symmetric Networks and Its Application to Balun Design

Design of A Broadband Balun Based on Composite Right/Left Handed Structure

A New Six-Port Transformer Modeling Methodology Applied to 10-Dbm 60-Ghz Cmos Ask Modulator Designs

Novel millimeter-wave Balun Using Embedded Magnetic Closed Loops