Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A New Six-Port Transformer Modeling Methodology Applied to 10-Dbm 60-Ghz Cmos Ask Modulator Designs

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

A Broadband and Equivalent-Circuit Model for Millimeter-Wave On-Chip M:N Six-Port Transformers and Baluns

Analysis and Modeling of Cmos Millimeter-Wave M:N Six-Port Transformers

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

Broadband Equivalent Circuit Modeling for Medium Voltage High-Frequency Transformers with Multi-Shielding Structure

Broadband Compact Model for On-Chip Mm-Wave Transformers and Baluns with Emphasis on Capacitive Coupling Effects

Analysis and Design of Broadband Balance-Compensated Transformer Baluns for Silicon-Based Millimeter-Wave Circuits

High-Efficiency Time-Division Multiplexing Modulation Technology for Modular Multiactive Bridge Converters

A broadband, high isolation millimeter-wave CMOS power amplifier using a transformer and transmission line matching topology

A New Highly-Scalable Equivalent Circuit Model for On-Chip Symmetrical Transformer with Accurate Substrate Modeling

Scalable Modeling of Layout Parameters in Cmos Integrated Stacked Millimeter Wave Transformer

A 60ghz CMOS Power Amplifier with Fully Symmetrical Distributed Active Transformer

A Broadband Monolithic Balun Based on 0.13μ CMOS m Process Using Planar-Spiral Transformers

A Broadband Monolithic Balun Based on 0.13/spl mu/m CMOS Process Using Planar-Spiral Transformers

Coupling Effects of Adjacent Inductors on the Transformer in the Millimeter-Wave Regime

Transformer Based Broadband Matching

High-Efficiency, Broadband Converter from A Rectangular Waveguide TE10 Mode to A Circular Waveguide TM01 Mode for Overmoded Device Measurement