Effects of SrCO3 Dosages on Structure and Dielectric Properties of BMT Ceramics

彭森,吴孟强,肖勇,许建明,刘轶,陈黎,张树人

DOI: https://doi.org/10.14062/j.issn.0454-5648.2011.12.016

2011-01-01

Abstract:Microwave dielectric ceramics of SrCO3 doped Ba（Mg1/3Ta2/3）O3 （BMT） were prepared using solid state reaction. Effects of SrCO3 on structure and microwave dielectric properties of BMT ceramic were investigated as a function of SrCO3 mass fraction （the same below） from 2% to 8%. It is found that sinterability of the BMT can be improved greatly and B-site ordering degree increases to a certain extent with adding the appropriate amount of SrCO3 . In comparison with pure BMT ceramics, the BMT ceramic doped with 6% SrCO3 shows a lower sintering temperature decreasing from 1650 ℃ to1500 ℃. Its bulk density ρV= 7.534g/cm3 , and relative density is 98.7%. The BMT demonstrates the best microwave dielectric properties： relative dielectric constant ε r=24.5, quality factor plus resonant frequency Q·f=99 000 GHz （8 GHz,）, and temperature coefficient of resonant frequency τ f=9.6×10–6 ℃–1