Abstract:In this study, an NH3 plasma-treated Cu/HZSM-5 sorbent was introduced to simultaneously remove H2S and PH3 in low-temperature and low-oxygen environments. The effects of the Cu loading amounts, modification methods, and plasma-treatment conditions on the adsorption–oxidation performance of the sorbents were investigated. From the performance test results, the sorbent treated by NH3 plasma with the specific energy input (SEI, electrical input energy to the unit volume of gas) value of 1 J·mL–1 (Cu/HZSM-5-[S1]) was identified as having the highest breakthrough capacities of 108.9 mg S·g–1 and 150.9 mg P·g–1 among all of the materials tested. After three times of regeneration, the sorbent can still maintain the ideal performance. The results of Fourier transform infrared (FT-IR) spectroscopy and CO2 temperature-programmed desorption (CO2-TPD) indicated that the NH3 plasma treatment can introduce amino groups (functional groups) onto the sorbent surface, which greatly increases the number and strength of the basic sites on the sorbent surface. Results of N2 adsorption/desorption isotherms and scanning electron microscopy–energy dispersive spectroscopy (SEM–EDS) showed that the morphology of the sorbent changed after the plasma treatment, which exposed more active sites (copper species). In situ IR spectra showed that the amino groups are continuously consumed during the reaction process, indicating that these amino groups can help sorbents to capture gas molecules. Moreover, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses indicated that CuO is the main active species and the consumption of CuO and accumulation of the reaction products on the surface and inner pores of the sorbent are the primary reasons for the deactivation of the sorbent.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02584?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02584</a>.Characterization methods (Appendix S1); effect of different Cu contents on the simultaneous removal of H2S and PH3 (Figure S1); discharge characteristics (Figure S2); N2 adsorption/desorption isotherms (Figures S3 and S4a); XRD patterns (Figures S4b and S5); wide-survey XPS spectra (Figure S6); sequential in situ IR spectra (Figure S7); physical properties (Tables S1 and S2); and XPS data (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02584/suppl_file/am1c02584_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Chemisorption of Hydrogen Sulfide on Halloysite-Based Porous Clay Heterostructures Modified with Potassium Permanganate

Humidity Swing Adsorption of H2S by Fibrous Polymeric Ionic Liquids (Pils)

Textural and hydrogen sulphide adsorption behaviour of double metal–silica modified with potassium permanganate

Development of CuO/Cu4(OH)6SO4 Nanoparticle Mixtures to Optimize the H2S Adsorption

Millimeter-sized Mesoporous Carbon Spheres for Highly Efficient Catalytic Oxidation of Hydrogen Sulfide at Room Temperature

3D Porous MXene Nanosheet/SnO2 Nanoparticle Composites for H2S Gas Sensing

Cu-MOF-derived Cu Nanoparticles Decorated Porous N-doped Biochar for Low-Temperature H2S Desulfurization

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

Chemisorption of Hydrogen Sulphide on Zinc Oxide Modified Aluminum-Substituted SBA-15

Study of mesoporous material supported copper oxide nanoparticles for H2S removal

Mercury Removal by Biomass-Derived Porous Carbon: Experimental and Theoretical Insights into the Effect of H2S

Sub-Micrometric MCM-41 Particles as Support to Design Efficient and Regenerable Maghemite-Based Sorbent for H₂S Removal

Performance of H2S sorption and CO2-H2S co-sorption on potassium promoted hydrotlcites

Porous Material Screening and Evaluation for Deep Desulfurization of Dry Air

Trace Hydrogen Sulfide Sensing Inspired by Polyoxometalate-Mediated Aerobic Oxidation

Implantation of Guanidine Chemical Adsorption Sites in Hyper-Crosslinked Polymers for Effective Adsorption and Conversion of H2S

A Nanoporous Polymeric Sorbent for Deep Removal of H2S from Gas Mixtures for Hydrogen Purification

Ca-Cu/Al2O3 Catalysts for H2S Removal at Near Ambient Temperature: Synthesis, Characterization, DFT Calculation, and Mechanistic Insights

Cu Incorporating into OMS-2 Lattice Creates an Efficient Hg0 Removal Sorbent in Natural Gas with Ambient-Temperature H2S/H2O Tolerance

Adsorption of Hg 0 from coal combustion flue gases by novel iodine-modified bentonite/chitosan sorbents

Cu/HZSM-5 Sorbent Treated by NH 3 Plasma for Low-Temperature Simultaneous Adsorption–Oxidation of H 2 S and PH 3