Abstract:Low sulfur capacity and low regeneration performance are the long-time problems in the industrial application of ZnO-based adsorbents for ambient H2S removal. However, no efficient approach has been reported up to now to simultaneously solve these two problems. With the increasingly stringent environmental regulations in China, a robust but sustainable ZnO-based adsorbent is strongly desired. Herein, we constructed such an adsorbent for the first time by introducing cobalt species into ZnO/SiO2 to form a heterostructured ZnO-Co3O4/SiO2 nanocomposite. For comparison, Co doped ZnO/SiO2 and Zn doped Co3O4/SiO2 were also fabricated. According to the breakthrough tests with initial H2S partial pressure of 57 Pa, the heterostructured ZnO-Co3O4/SiO2 adsorbent exhibited highest sulfur capacity of 188.4 mg S/g sorbent at breakthrough level of 1%, the corresponded partition coefficient (at 0.57 Pa, 303 K) was 10.3 mol. kg(-1). Pa-1. The introduced Co species not only improved the dispersion of ZnO nanograins, but also served as active sites for reacting and oxidizing H2S molecular. It also found that the formed ZnO-Co3O4 heterostructure could boost the hydroxylation of H2O, which provided an alkali environment for H2S dissociation. More meaningfully, this exhausted sorbent could be secondarily utilized as catalyst for carbonyl sulfide (COS) hydrogenation and exhibited 100% COS conversion even at a temperature lower than 200 degrees C, which was almost 3.3 times the conversion achieved by a commercial Co-Mo/Al2O3 catalyst (30%). This study will provide a new idea for rational design of metal oxide-based adsorbents to avoid causing secondary pollution by the spend adsorbents.

Sub-Micrometric MCM-41 Particles as Support to Design Efficient and Regenerable Maghemite-Based Sorbent for H₂S Removal

Millimeter-sized Mesoporous Carbon Spheres for Highly Efficient Catalytic Oxidation of Hydrogen Sulfide at Room Temperature

Development of CuO/Cu4(OH)6SO4 Nanoparticle Mixtures to Optimize the H2S Adsorption

Study of mesoporous material supported copper oxide nanoparticles for H2S removal

Hydrogen Sulfide Adsorption by Iron Oxides and Their Polymer Composites: A Case-Study Application to Biogas Purification

Desulfurization Behavior of Fe–Mn-Based Regenerable Sorbents for High-Temperature H2S Removal

Carbon nanofibers supported sorbents with enhanced performance via microwave-assisted in-situ structural modifications for H 2 S removal

A regenerable oxide-based H2S adsorbent with nanofibrous morphology

Mesoporous SBA-15 Supported Iron Oxide: A Potent Catalyst for Hydrogen Sulfide Removal

Probing mesoporous character, desulfurization capability and kinetic mechanism of synergistic stabilizing sorbent CaxCuyMnzOi/MAS-9 in hot coal gas

Poly(Ethyleneimine)-Loaded Silica Monolith with A Hierarchical Pore Structure for H2s Adsorptive Removal

Chemisorption of Hydrogen Sulfide on Halloysite-Based Porous Clay Heterostructures Modified with Potassium Permanganate

A new nano-sorbent for fast and efficient removal of heavy metals from aqueous solutions based on modification of magnetic mesoporous silica nanospheres

Exceptional performance of Fe@carbon-rich nanoparticles prepared via hydrothermal carbonization of oil mill wastes for H 2 S removal

Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: Adsorption, regeneration, and mechanism

A Sustainable Design of ZnO-based Adsorbent for Robust H2S Uptake and Secondary Utilization As Hydrogenation Catalyst

Three Dimensional Ordered Macroporous Zinc Ferrite Composited Silica Sorbents with Promotional Desulfurization and Regeneration Activity at Mid-High Temperature

Continuous and Controllable Synthesis of Mno2 Adsorbents for H2s Removal at Low Temperature

Magnetically separable mesoporous silica nanocomposite and its application in Fenton catalysis

Kinetic Study on the Sulfidation and Regeneration of Manganese-Based Regenerable Sorbent for High Temperature H2S Removal

Interaction among Metal Components of Zn–Mn–Cu-Based Sorbents Prepared by High-Pressure Impregnation Method and Its Effect on the Removal of H2S from Hot Coal Gas