Abstract:In this study, an NH3 plasma-treated Cu/HZSM-5 sorbent was introduced to simultaneously remove H2S and PH3 in low-temperature and low-oxygen environments. The effects of the Cu loading amounts, modification methods, and plasma-treatment conditions on the adsorption–oxidation performance of the sorbents were investigated. From the performance test results, the sorbent treated by NH3 plasma with the specific energy input (SEI, electrical input energy to the unit volume of gas) value of 1 J·mL–1 (Cu/HZSM-5-[S1]) was identified as having the highest breakthrough capacities of 108.9 mg S·g–1 and 150.9 mg P·g–1 among all of the materials tested. After three times of regeneration, the sorbent can still maintain the ideal performance. The results of Fourier transform infrared (FT-IR) spectroscopy and CO2 temperature-programmed desorption (CO2-TPD) indicated that the NH3 plasma treatment can introduce amino groups (functional groups) onto the sorbent surface, which greatly increases the number and strength of the basic sites on the sorbent surface. Results of N2 adsorption/desorption isotherms and scanning electron microscopy–energy dispersive spectroscopy (SEM–EDS) showed that the morphology of the sorbent changed after the plasma treatment, which exposed more active sites (copper species). In situ IR spectra showed that the amino groups are continuously consumed during the reaction process, indicating that these amino groups can help sorbents to capture gas molecules. Moreover, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses indicated that CuO is the main active species and the consumption of CuO and accumulation of the reaction products on the surface and inner pores of the sorbent are the primary reasons for the deactivation of the sorbent.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02584?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02584</a>.Characterization methods (Appendix S1); effect of different Cu contents on the simultaneous removal of H2S and PH3 (Figure S1); discharge characteristics (Figure S2); N2 adsorption/desorption isotherms (Figures S3 and S4a); XRD patterns (Figures S4b and S5); wide-survey XPS spectra (Figure S6); sequential in situ IR spectra (Figure S7); physical properties (Tables S1 and S2); and XPS data (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02584/suppl_file/am1c02584_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dynamic Desulfurization Process over Porous Zn–Cu-Based Materials in a Packed Column: Adsorption Kinetics and Breakthrough Modeling

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Performance Evaluation of Zn-Fe Adsorbent for H 2 S Adsorption During Biogas Purification

Cu Nanoparticles Inlaid Mesoporous Carbon Aerogels as a High Performance Desulfurizer.

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Kinetic and Thermodynamic Study of the Wet Desulfurization Reaction of ZnO Sorbents at High Temperatures

Removal of Toluene and SO2 by Hierarchical Porous Carbons: a Study on Adsorption Selectivity and Mechanism

Experimental Bench-Scale Study of Residual Biomass Syngas Desulfurization Using ZnO-Based Adsorbents

Removal of H 2 S from simulated blast furnace gas by adsorption over metal-modified 13X zeolite

Efficiently Selective Oxidation of H 2 S to Elemental Sulfur over Covalent Triazine Framework Catalysts

Interaction among Metal Components of Zn–Mn–Cu-Based Sorbents Prepared by High-Pressure Impregnation Method and Its Effect on the Removal of H2S from Hot Coal Gas

A Sustainable Design of ZnO-based Adsorbent for Robust H2S Uptake and Secondary Utilization As Hydrogenation Catalyst

Probing mesoporous character, desulfurization capability and kinetic mechanism of synergistic stabilizing sorbent CaxCuyMnzOi/MAS-9 in hot coal gas

Synthesis of ZnO-CuO and ZnO-Co3O4 Materials with Three-Dimensionally Ordered Macroporous Structure and Its H2S Removal Performance at Low-Temperature

Insights into the Mechanism of Low-Temperature H2S Oxidation over Zn–Cu/Al2O3 Catalyst

Deactivation Model Study of High Temperature H2S Wet-Desulfurization by Using ZnO

Cu/HZSM-5 Sorbent Treated by NH 3 Plasma for Low-Temperature Simultaneous Adsorption–Oxidation of H 2 S and PH 3

Sheet-assembled Zn-based sorbents towards highly efficient desulfurization of hot coal gas: H 2 S-absorption/COS-release behavior and sulfur-release inhibiting mechanism

Ammonia-induced CuO/13X for H2S removal from simulated blast furnace gas at low temperature

Continuous and Controllable Synthesis of Mno2 Adsorbents for H2s Removal at Low Temperature

Experimental study and DFT calculation of the role of Cu loaded on activated carbon in desulfurization under dry and moist atmospheres