Abstract:Slurry reactors have recently received more attention because of their advantages in caloric transfer. At present, the synthesis of dimethyl ether (DME) and methanol in slurry reactors is considered to be promising. The catalysts currently used in slurry reactors are all prepared by dispersing the traditional solid catalysts into an organic medium, which easily leads to the medium viscosity increase, defluidization decrease, and activity drop. This work suggests a novel method of preparing slurry catalysts for slurry reactors. Its main innovative thought lies in the direct preparation of catalysts from a solution to the slurry. Firstly, a catalyst precursor with a three-dimensional net structure is prepared. Then the precursor is modified by solvent substitution or heterogeneous azeotropic distillation and treated by N-2. After the treatment, a slurry catalyst is obtained. In this paper, two CuO/ZrO2 slurry catalysts were prepared by this new method and characterized by X-ray diffraction, N-2 adsorption, and temperature-programmed reduction. The catalysts were evaluated in CO hydrogenation in a slurry reactor. The results show that the slurry catalysts have a phase structure similar to that of the catalyst prepared by the traditional method. The CuO/ZrO2 slurry catalyst modified by heterogeneous azeotropic distillation is highly dispersed. Using this CuO/ZrO2 slurry catalyst can directly synthesize DME from CO hydrogenation without adding any methanol dehydration component, and the highest DME selectivity reaches 92.10%. The slurry catalyst is stable during the reaction for fifteen days, and no significant deactivation occurs.

Effect of La and Mn Promoters on Structure and Performance of Cuzr Catalyst Prepared by Complete Liquid-Phase Technology

Structure and Catalytic Performance of Mn- and La-Modified Cu/Zro2 Catalysts for Methanol Synthesis

Effect of Preparation Method on the Performance of Cu‐Mn‐(La)‐Zr Catalysts for CO2 Hydrogenation to Methanol

Effect of promoters on the performance of CuNi catalysts for hydrogen production from methanol decomposition

Complete liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry catalysts for synthesis of dimethyl ether

Effect of La modified Cu/ZrO2 catalysts on alcohol synthesis

The Role of the Promoters in Cu Based Catalysts for Methanol Steam Reforming

Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor

Effect of Composition of Raw Materials on Structure and Dimethyl Ether Synthesis Activity of Cu-Zn-Al Catalyst Prepared by Complete Liquid Phase Method

Comparative studies of manganese-doped copper-based catalysts: the promoter effect of Mn on methanol synthesis

The Structure Properties of CuZnAl Slurry Catalysts Prepared by a Complete Liquid-Phase Method and its Catalytic Performance for DME Synthesis from Syngas

Xps Study on Cuznal Catalysts Prepared by Different Methods for Direct Synthesis of Dimethyl Ether

The influence of La doping on the catalytic behavior of Cu/ZrO2 for methanol synthesis from CO2 hydrogenation

Liquid-phase preparation of CuO/ZrO2 catalyst used in slurry reactors and its catalytic activity for CO hydrogenation

Synergistic Effect of Zinc and Manganese in Cu-Mn-Zn/Y Catalyst for Syngas-to-dimethyl Ether

Effect of Si Content on the Performance of Direct Synthesis of Dimethyl Ether over Slurry CuZnAl Catalyst Prepared by Complete Liquid Phase Technology

Surface Lattice Oxygen Activation Via Zr4+ Cations Substituting on A2+ Sites of MnCr2O4 Forming ZrxMn1−xCr2O4 Catalysts for Enhanced NH3-SCR Performance

Effect of Promoters on Cu–ZnO–SiO2 Catalyst for Gas-Phase Hydrogenation of Maleic Anhydride to Γ-Butyrolactone at Atmospheric Pressure

Performance of Cu-Mn-Zn/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: The effect of Zn content

Effect of the Addition of Manganese and Zinc on the Properties of Copper-Based Catalyst for the Synthesis of Syngas to Dimethyl Ether