Abstract:Due to the large amounts of CO pollutant from iron ore sintering and vehicle emissions, the control of CO emission becomes more and more important for the environment. To control the emission of CO more effectively, the catalysts of LaMnO3 perovskite with HZSM-5 zeolite as support were prepared by sol-gel method. The structure and catalytic activities of catalysts were characterized and analyzed. According to the results of X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS), the LaMnO3 perovskite phase is successfully obtained in all the supported catalysts. The average particle sizes of supported catalysts are in the range of 15-38 mu m. Compared with the perovskite catalysts loaded on other kinds of supports, LaMnO3 supported with HZSM-5 has a larger specific surface area (SSA). The SSAs of supported catalysts with different loading amount are in the range of 190-300 m(2)/g. The HZSM-5 support improves the catalytic activity of LaMnO3 catalyst by increasing the SSA. The activity of supported catalyst becomes higher when the loading amount increases from 20% to 60%. The catalyst with 60% perovskite loaded shows the best activity in CO catalytic oxidation. The CO conversion of 60LM/HZSM-5 attains 50% and 90% at 172.7 degrees C and 201.5 degrees C, respectively. The activities of catalysts with 80% and 100% perovskite loaded decrease due to the accumulated pores formed by too much perovskite. The supported catalysts exhibit favorable activities in consecutive reaction cycles. It turns out that HZSM-5 support is appropriate for the synthesis of active perovskite catalysts for CO oxidation.

Effect of Preparation Method on the Performance of Cu‐Mn‐(La)‐Zr Catalysts for CO2 Hydrogenation to Methanol

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Performance of Cu-Mn-Zn/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: The effect of Zn content

Structure and Catalytic Performance of Mn- and La-Modified Cu/Zro2 Catalysts for Methanol Synthesis

Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

Effect of La modified Cu/ZrO2 catalysts on alcohol synthesis

The influence of La doping on the catalytic behavior of Cu/ZrO2 for methanol synthesis from CO2 hydrogenation

Influences of preparation methods of ZrO2 support and treatment conditions of Cu/ZrO2 catalysts on synthesis of methanol via CO hydrogenation

Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu/ZrO2 catalysts

Effect of La and Mn Promoters on Structure and Performance of Cuzr Catalyst Prepared by Complete Liquid-Phase Technology

The Effect Of Lanthana On Catalytic Performance Of La-Modified Cu/Zro2 Catalysts For Co Hydrogenation

CO2 Hydrogenation to Methanol over La2O3-Promoted CuO/ZnO/Al2O3 Catalysts: A Kinetic and Mechanistic Study

Synthesis, characterization and activity pattern of Cu–ZnO/ZrO2 catalysts in the hydrogenation of carbon dioxide to methanol

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

EFFECT OF LA2O3 ON THE CATALYTIC PERFORMANCE AND PROPERTIES OF CU/ZNO CATALYST FOR HYDROGENATION OF CO2

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

A practical approach for the preparation of high activity Cu/ZnO/ZrO2 catalyst for methanol synthesis from CO2 hydrogenation

Dual active sites over Cu-ZnO-ZrO2 catalysts for carbon dioxide hydrogenation to methanol

Investigation of LaMnO3 Catalyst Loaded on HZSM‐5 Zeolite for CO Catalytic Oxidation

The effect of Cu/Zn molar ratio on CO2 hydrogenation over Cu/ZnO/ZrO2/Al2O3 catalyst

Effect of Preparation Method on the Catalytic Performance of HZSM-5 Zeolite Catalysts in the MTH Reaction