Abstract:Nanoindentation-based fracture toughness measurements of ceramic materials like silicon carbide (SiC) with pyramidal indenters are of significant interest in materials research. A majority of currently used fracture toughness models have been developed for Vickers indenters and are limited to specific crack geometries. The validity of the indentation-cracking method for the fracture toughness measurement of single crystal SiC, the elastic-plastic anisotropy and orientation dependence around the c-axis when indented in the direction is examined using nanoindentation with different pyramidal indenters. The residual impressions are analyzed using scanning electron microscopy to measure the crack lengths and the validity of existing fracture toughness measurement methods and equations is analyzed. A combination of nanoindentation with different pyramidal indenters to produce a wide range of effective strains and finite element simulation is used to extract flow properties of single crystal SiC in the direction. It is observed that there is no orientation dependence around the c-axis when SiC-6H is indented in the direction with a Berkovich indenter, i.e., it is transversely isotropic. It is also found that for a Berkovich indenter, the Jang and Pharr model, which is based on the Lawn model for cone/halfpenny cracks, gives approximately constant values at low loads ( 1 N), the Laugier model gives constant fracture toughness values. Finite element analysis using equivalent cones is used along with measured hardness values to estimate the yield strength, the work hardening exponents and the stress–strain curve for single crystal SiC-6H in the direction.

Mechanical Analysis Of Indentation Cracking In Al2o3/Zro2 Nanostructured Laminated Ceramics

Relationship between Surface Compressive Stresses and Transformation Toughening of ZrO2 Laminated Ceramics

Transformation Driving Force for Indentation Cracking in Zirconia Ceramics

Micromechanical characterization of zirconia and silicon nitride ceramics using indentation and scratch methods

Transformation Toughening of Al2O3/ZrO2 Laminated Ceramics with Residual Compressive Stress

The Indentation Thermal Shock Behavior of Laminated ZrB2–SiC Ceramics with Strong Interfaces

Indentation-based Methods to Assess Fracture Toughness for Thin Coatings

Quantitative In-Situ Study of Strength-Governed Interfacial Failure Between H-Bn and Polymer-Derived Ceramic

Assessing fracture toughness in sintered Al2O3–ZrO2(3Y)–SiC ceramic composites through indentation technique

Finite Element and Experimental Analysis of Vickers Indentation Testing on Al2O3 with Diamond-Like Carbon Coating

Indentation deformation and microcracking in β-Si 3N 4-based nanoceramic

Fracture from Knoop Indentation-Induced Flaws in Sintered Silicon Carbide and Hot-Pressed Silicon Nitride

Molecular Dynamics Study of the Nanoindentation Behavior of Cu64Zr36/Cu Amorphous/Crystalline Nanolaminate Composites

Strength/Crack-Size Relationship for Knoop-Indented Bending Specimens and Its Application to Silicon Nitride Ceramics

Nanoscale Plasticity Behavior of Additive-Manufactured Zirconia-Toughened Alumina Ceramics During Nanoindentation

Toughening of Laminated ZrB2–SiC Ceramics with Residual Surface Compression

Mechanism Analysis of Thermal Shock Properties for Zrb2-20%Sicp-10%Aln Ultra-High Temperature Ceramic with the Surface Defects

Nano-mechanical properties measurement of dissimilar bonding 304L/zircalloy-4 by nanoindentation test

Mechanical Properties of Aisi 1045 Ceramic Coated Materials by Nano Indentation and Crack Opening Displacement Method

Fracture Toughness Evaluation and Plastic Behavior Law of a Single Crystal Silicon Carbide by Nanoindentation

On the Local Crack Resistance of Al2O3–TiC Composites Evaluated by Direct Indentation Method