Abstract:Understanding the thermal stability of ceramic matrix composites is one of the necessary prerequisites for their engineering application. This study aimed to investigate the stress response and failure mechanism of SiC-coated Cf composite during thermal shock in an O2 free environment, at temperature between 500 and 1800 degrees C. Composites with a single layer of SiC coating, and a reinforcing phase are carbon fiber yarns with a threedimensional four-step braided structure. A meso-scale finite element model considering the orientation of fiber yarns was established to analyze thermal residual stress (TRS) and thermal shock stress (TSS) by transient analysis. Results indicated that the most dangerous position generated by the TRS was in the matrix close to the fiber yarn/matrix interface. Initial cracks first nucleated in the matrix, because the matrix was subjected to large residual compressive stress along the braiding direction, which is related to the distribution characteristics of the fiber yarns (braiding method). Fiber yarns with different orientation exhibited almost the same stress state, and interaction between fiber yarns resulted in a similar "twisted" state. For single fiber yarns, the principal axis and fiber yarn/fiber yarn interface were prone to failure. TSS in the composites rapidly increased during the initial cooling stage. A sudden change in temperature and stress gradient led to cracking and peeling at the composites/ coating interface. Possible failure modes and mechanisms of the composites with and without the SiC coating are discussed.

The Indentation Thermal Shock Behavior of Laminated ZrB2–SiC Ceramics with Strong Interfaces

Thermal Shock Resistance of Laminated ZrB2–SiC Ceramic Evaluated by Indentation Technique

Comparative Evaluation of Two Different Methods for Thermal Shock Resistance of Laminated ZrB2-SiCw/BN Ceramics

R-curve Behavior of Laminated ZrB2–SiC Ceramic with Strong Interfaces

Residual Stress Estimation in Laminated ZrB2-SiC Ultra-High Temperature Ceramics with Strong Interfaces Using X-ray Diffraction and Indentation Techniques

Research on Thermal Shock Resistance of ZrB2–SiC–AlN Ceramics Using an Indentation-Quench Method

Toughening of Laminated ZrB2–SiC Ceramics with Residual Surface Compression

Experiment and simulation analysis on thermal shock resistance of laminated ceramics with graphite and boron nitride interfaces

Mechanism Analysis of Thermal Shock Properties for Zrb2-20%Sicp-10%Aln Ultra-High Temperature Ceramic with the Surface Defects

The Influential Factors Analysis of Surface Crack Propagation Behavior of ZrB2-20%SiC-10%AlN Ceramic Subjected to Thermal Shock

Microstructure and Mechanical Properties of Laminated ZrB2–SiC Ceramics with ZrO2 Interface Layers

Mechanical and ablation properties of laminated ZrB2-SiC ceramics with Si3N4 whisker interface

Mechanical Analysis Of Indentation Cracking In Al2o3/Zro2 Nanostructured Laminated Ceramics

Numerical Simulation of Pre-Crack Propagation in Zrb2-Sic-Aln Ceramics Subjected to Thermal Shock

Laminated ZrB2–SiC Ceramic with Improved Strength and Toughness

The Thermal Shock Resistance of the ZrB2–SiC–ZrC Ceramic

FEM Analysis of the Stress Response and Failure Mechanism of SiC-coated Cf/ SiC Composites During Thermal Shock

Cyclic Thermal Shock Behaviors of ZrB2-SiC Laminated Ceramics Sintered with Different-Sized Particles for Each Sublayer

Thermal Shock Behavior of Porous ZrB2–SiC Ceramics

Thermal Shock Cracking of Porous ZrB 2 -Sic Ceramics

Relationship between Surface Compressive Stresses and Transformation Toughening of ZrO2 Laminated Ceramics