Abstract:Preparation of Nd(Fe,Mo)12NX∕α-Fe nanocomposite magnets by the strip casting technique and subsequent mechanical alloying method are investigated. The result shows that the cooling rate of NdFe11Mo1 starting materials has great effects on the magnetic properties of the final Nd(Fe,Mo)12NX∕α-Fe nanocomposite magnets, and the rapid solidification is helpful for improving magnetic properties. The nanocomposite magnets starting from strip have a Br of 65emu∕g, an iHc of 8372Oe, and a (BH)max of 7.3MGOe, which is better than those of the corresponding materials starting from the conventional ingots. x-ray diffraction and scanning electron microscopy observations for the strips and the ingots show that not only the strip have much more 1:12 main phase and lower Fe-rich phase but also the distribution of 1:12 phase and Fe-rich phase in the strips are more uniform. The strips with the uniform microstructure are not only found to improve the efficiency of the high energy ball milling but also avoid the presence of excessive α-Fe nuclei. High resolution transmission electron microscopy observations show that the mechanically alloyed powders starting from the strips also have more homogeneous microstructure. In the end, the exchange coupling interactions are studied by the ratio of remanence coercivity Hr to the intrinsic coercivity Hc (Hr∕Hc). The Hr∕Hc of the nanocomposite magnets is found to be 1.25, while that of single phase Nd(Fe,Mo)12NX material is about 1.0. This shows that there exists strong exchange spring effect between the hard phase Nd(Fe,Mo)12NX and soft phase α-Fe.

Structural and Magnetic Properties of Nd(Fe,Mo)(12)N-X Compounds Produced by Strip-Casting Method

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Preparation of Anisotropic Nd(Fe,Mo)(12)N-X Magnetic Materials by the Strip-Casting Technique

Preparation of Anisotropic Nd(Fe,Mo)12N1.0 Magnetic Materials by Strip Casting Technique and Direct Nitrogenation for the Strips

Microstructure and Magnetic Properties of Nd(FeTiNb)<sub>12</sub>N/-Fe Nanocomposite Permanent Magnetic Materials

Magnetic phase transitions and magnetic properties of nd3(fe, mo)29 compound and its nitride

Magnetic Properties of Nd(Fe1-xCox)10.5M1.5 (m=mo and V) and Their Nitrides

Study on Crystallization Behavior and Microstructure of Melt-Spun Nd2(Fe,Nb)14B/α-Fe Alloys

Phase Transformation and Magnetic Properties of Mechanically Alloyed Ndfe12-Xmoxny

Influences of Intergranular Structure on the Magnetic Properties of Directly Cast Nanocrystalline NdFeCoTiNbBC Alloys

Melt Spun and Suction Cast Nd-Fe-Co-B-Nb Hard Magnets with High Nd Contents

Nanocrystalline SmCo12 Main-Phase Alloys with V-doping: Structure Stability and Magnetic Performance

Research and Development of Interstitial Compounds

High Coercivity Microcrystalline Nd-rich Nd–Fe–Co–Al–B Bulk Magnets Prepared by Direct Copper Mold Casting

Structure and Magnetic Characterization of Amorphous and Crystalline Nd–Fe–Al Alloys

Effect of Mo Concentration on the Phase Composition and Magnetic Properties of Nd8(Fe,Mo)86B6 Nanocomposite Magnets

Fundamental Properties of Melt-Spun Stoichiometric Y2Fe14B Alloy and the Advantages of Nd Substitution

Magnetic and Microstructural Properties of Nd7fe67b22mo3zr0.5ti0.5 Nanocomposite Magnets Produced by Injection Casting

Nanocomposite Nd-Y-Fe-B-Mo Bulk Magnets Prepared by Injection Casting Technique

Magnetic properties and microstructure of Ce and Zr synergetic stabilizing Ti-lean SmFe 12 -based strip-casting flakes

Nd 5Fe 64B 23Mo 4Y 4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors