Abstract:Since a single metal material tube is difficult in meeting the diverse practical application needs of metal pipeline across various environments, Mg/Al bimetal composite tubes (BCTs) were fabricated through the power spinning process at a temperature of 300 °C. This study involved conducting hot compression tests on 7075 aluminum and AZ31b magnesium, followed by importing the derived material parameter model into Simufact Forming software for simulation purposes. The purpose of this study is to clarify the wall thickness variation trend and deformation behavior of Mg/Al BCTs under the condition of 10-30% thinning rate. The findings revealed that deformation predominantly occurs in the BCT's cladding tube made of aluminum. Notably, when the thinning rate exceeds 25%, the magnesium tube starts to gradually deform. Tests assessing the mechanical properties of the cladding tube indicated a significant improvement in elongation and plastic deformation capability post-hot spinning, with elongation at break increasing from 9.35 to 27.21%. Additionally, examination of the tensile fracture's microstructure revealed that the cladding tube's plastic deformation capacity was greatly enhanced after hot spinning, displaying obvious ductile fracture features. Microstructural observations at various positions along the cladding tube highlighted a distinct grain gradient distribution in the radial direction. Owing to the intense plastic deformation, dynamic recrystallization (DRX) and abnormal grain growth were observed, culminating in a bimodal grain structure. The enhanced plasticity of the tube primarily contributes to the emergence of grain gradient distribution. These research outcomes offer theoretical guidance for the development of high-performance composite tubes.

Microstructure and mechanical properties of centrifugal casting AZ61A magnesium alloy tube

Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-5Zn-1Mn Alloy Tube

Microstructures and Mechanical Properties of As-Cast and As-Extruded Mg-4.50zn-1.13ca (wt%) Alloys

Microstructure and Mechanical Properties of AZ80 Magnesium Alloy Tube Fabricated by Hot Flow Forming

Microstructure evolution and mechanical properties of an ultra-high strength casting Mg–15.6Gd–1.8Ag–0.4Zr alloy

Microstructure and Super High Strength of Cast Mg-8.5gd-2.3y-1.8ag-0.4zr Alloy

Microstructure Evolution and Mechanical Properties of AZ80 Mg Alloy during Annular Channel Angular Extrusion Process and Heat Treatment

Study on microstructure and properties of thin tube of AZ31 magnesium alloy by extrusion technology

Microstructure and Mechanical Properties of As-Cast and Extruded Mg–8Li–3Al–2Zn–0.5Nd Alloy

Microstructure and bendabiltiy of AM60 and AZ61 magnesium alloy tubes

Microstructure and Mechanical Properties of Mg–Zn–Ca–Ce Alloy Processed by Semi-Continuous Casting

The Deformation Behavior and Microstructure Evolution of Cladding Tube during Spinning Composite Process of Mg/Al Tube

Microstructures and Mechanical Properties of Hot-extruded Mg-6Zn-xCu-0.6Zr(x=0,0.5,1.0,1.5) Alloys

Microstructure and mechanical properties of Al-Cu-Mg alloy tube fabricated by friction stir welding and tube spinning

Microstructure and Mechanical Properties of Mg–4.0Zn–0.5Ca Alloy

Effects of Ca Addition on Tensile Properties and Microstructures of Hot-Extruded AZ91 Alloy Tube

Microstructure Formation in Centrifugally Cast Al–Bi Alloys

Microstructure Characterization and Mechanical Properties of a Zn and Rare Earth Modified Mg Alloy

Microstructure and Mechanical Properties of WE43 Magnesium Alloy Fabricated by Direct-Chill Casting

Microstructure and Properties of AZ91D Magnesium Alloy in Combination Process of Die Casting with Forging

Microstructural evolution and enhanced mechanical properties of Mg–Gd–Y–Zn–Zr alloy via centrifugal casting, ring-rolling and aging