Abstract:Purpose: In this work, tension, impact, bend and fatigue tests were conducted in an AM60 magnesium alloy. The effects of environmental temperature and loading rates on impact and tension behavior of the alloy were also investigated. Design/methodology/approach: The tests were conducted using an Instron universal testing machine. The loading speed was changed from 1 mm/min to 300 mm/min to gain a better understanding of the effect of strain rate. To understand the failure behavior of this alloy at different environmental temperatures, Charpy impact test was conducted in a range of temperatures (-40~35°C). Plane strain fracture toughness (KIC) was evaluated using compact tension (CT) specimen. To gain a better understanding of the failure mechanisms, all fracture surfaces were observed using scanning electron microscopy (SEM). In addition, fatigue behavior of this alloy was estimated using tension test under tension-tension condition at 30 Hz. The stress amplitude was selected in the range of 20~50 MPa to obtain the S-N curve. Findings: The tensile test indicated that the mechanical properties were not sensitive to the strain rates applied (3.3x10-4~0.1) and the plastic deformation was dominated by twining mediated slip. The impact energy is not sensitive to the environmental temperature. The plane strain fracture toughness and fatigue limit were evaluated and the average values were 7.6 MPa.m1/2 and 25 MPa, respectively. Practical implications: Tested materials AM60 Mg alloy can be applied among others in automotive industry aerospace, communication and computer industry. Originality/value: Many investigations have been conducted to develop new Mg alloys with improved stiffness and ductility. On the other hand, relatively less attention has been paid to the failure mechanisms of Mg alloys, such as brittle fracture and fatigue, subjected to different environmental or loading conditions. In this work, tension, impact, bend and fatigue tests were conducted in an AM60 magnesium alloy.

Microstructure and bendabiltiy of AM60 and AZ61 magnesium alloy tubes

Microstructure Evolution of Mg-3%Al-1%Zn Alloy Tube During Warm Bending

Bendability of the Wrought Magnesium Alloy AM30 Tubes Using a Rotary Draw Bender

Deformation mechanisms in AZ31 magnesium alloy tube bending

Microstructure and Mechanical Properties of AZ80 Magnesium Alloy Tube Fabricated by Hot Flow Forming

Investigation on Mechanical Behaviour of AM60 Magnesium Alloys

Microstructure and Property of Magnesium Alloy Microtubule

Microstructural and Textural Evolution of Az61 Magnesium Alloy Sheet During Bidirectional Cyclic Bending

Study on Microstructure Evolution and Deformation Behavior of Mg– Zn Base Alloy Pipes During Hot Bending

Bending Mechanisms in AM30 Alloy Tube Using a Rotary Draw Bender

Improving the Room-Temperature Bendability of Mg-3Al-1Zn Alloy Sheet by Introducing a Bimodal Microstructure and the Texture Re-Orientation

In-situ investigation on the microstructure evolution and plasticity of two magnesium alloys during three-point bending

Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-5Zn-1Mn Alloy Tube

Grain Refinement in Az61 Mg Alloy During Hot Cyclic Bending

Development And Validation Of Extrusion Limit Diagram For Az31 And Am30 Magnesium Alloys

Simultaneous Improvement of Strength and Ductility in ZK60 Magnesium Alloy by Constructing the Bimodal Grain Structure

Superplasticity and Diffusion Bonding of Magnesium Alloy ZK60

Experimental Study on Rotary Draw Bending of Magnesium Alloy Extruded Tubes

Preparation of AZ31 Magnesium Alloy Thin-Walled Tubes by a New Type of Compound Extrusion by Direct Extrusion and Multi-Pass Bending

Microstructure Evolution and Mechanical Properties of AZ80 Mg Alloy during Annular Channel Angular Extrusion Process and Heat Treatment

Microstructure and mechanical properties of centrifugal casting AZ61A magnesium alloy tube