Abstract:Biomass based carbon has captured more and more attention because it is environmentally friendly and has properties of low cost and ideal sustainability. In this study, three kinds of activated biomass carbons (ie, ABC-700, ABC-800 and ABC-900) were first carbonized through pine sawdust pyrolysis and then activated using KOH under three different activation temperatures (ie, 700 degrees C, 800 degrees C and 900 degrees C). The structure properties of the prepared activated biomass carbons were characterized by N-2-adsorption/desorption, SEM, TEM, XRD, Raman, XPS, TG and ultimate analysis. To clarify the activation mechanism, the gas products produced during KOH activation process were measured online with an ETG gas analyzer. The performance of the activated biomass carbons derived from pine sawdust for supercapacitor and CO2 capture was then evaluated. The predominant gas products during the activation process are H-2 and CO. It indicates that the porous structure was created by using an enhanced etching reaction between carbon atoms and KOH. An increment of the activation temperature from 700 to 900 degrees C results in the increase of surface area (from 1728.66 to 2330.89 m(2)/g) and total pore volume (from 0.671 to 1.914 cm(3)/g). Among the three samples, ABC-900 exhibits the maximal specific capacitance of 175.6 F center dot g(-1) and high energy density of 24.39 Wh center dot kg(-1) at the 0.5 A center dot g(-1). And the ABC-700 shows the maximal CO2 capture capacity of 4.21 mmol/g and high selectivity of CO2 over N-2 at 298 K and 1 bar. In addition, ABC-700 also has excellent stability and reproducibility after 15 times adsorption-desorption cycles. The unexceptionable electrochemical performance and adsorption capacity of the biomass-carbons show its broad application prospects in the field of supercapacitors and CO2 capture.

Preparation of Bamboo-derived Activated Carbon for Direct Carbon Fuel Cell

Study on Bamboo-Derived Activated Carbon As Catalyst Support

Cobalt-based N-doped Bamboo-Like Graphene Tubes with Enhanced Durability for Efficient Oxygen Reduction Reaction in Direct Borohydride Fuel Cell

Preparation of High-Performance Porous Carbon Materials by Citric Acid-Assisted Hydrothermal Carbonization of Bamboo and Their Application in Electrode Materials

Preparation and pore characterization of activated carbon from Ma bamboo (Dendrocalamus latiflorus) by H3PO4 chemical activation

Mechanism of Biomass Activation and Ammonia Modification for Nitrogen-Doped Porous Carbon Materials.

Catalytic Graphitization for Preparation of Porous Carbon Material Derived from Bamboo Precursor and Performance as Electrode of Electrical Double-Layer Capacitor

Preparation and characterization of activated carbon from bamboo by microwave-induced phosphoric acid activation

Preparation and Electrochemical Properties of PF-based Activated Carbon

In Situ Dry Chemical Synthesis of Nitrogen-Doped Activated Carbon from Bamboo Charcoal for Carbon Dioxide Adsorption

Autohydrolysis treatment of bamboo and potassium oxalate (K2C2O4) activation of bamboo product for CO2 capture utilization

Preparation of Activated Biomass Carbon from Pine Sawdust for Supercapacitor and CO2 Capture

Green Conversion of Bamboo Chips into High-Performance Phenol Adsorbent and Supercapacitor Electrodes by Simultaneous Activation and Nitrogen Doping

Preparation of Nitrogen-containing Activated Carbon from Waste Medium Density Fiberboard for Electric Double Layer Capacitor

A green trace K2CO3 induced catalytic activation strategy for developing coal-converted activated carbon as advanced candidate for CO2 adsorption and supercapacitors

Fermentation-hot pressing assisted preparation of bamboo green-activated carbon for supercapacitors

Preparation of High-Surface-Area Activated Carbon from Zizania Latifolia Leaves by One-Step Activation with K2co3/Rarefied Air

Preparation of activated carbon through the pyrolysis of waste bamboo chips and evaluation of its CO2 adsorption efficacy

KHCO3 Chemical-Activated Hydrothermal Porous Carbon Derived from Sugarcane bagasse for Supercapacitor Applications

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Synthesis of highly porous activated carbon nanofibers derived from bamboo waste materials for application in supercapacitor