Abstract:A green and novel FeCl3‐catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo‐based hierarchical porous carbons (BHPCs) with ultra‐high specific surface area and excellent electrochemical properties. Summary Herein, a green and novel FeCl3‐catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo‐based hierarchical porous carbons (BHPCs) with ultra‐high specific surface area and excellent electrochemical properties. Utilizing this mild FeCl3 catalyst can not only promote the dehydration, condensation, and carbonization of bamboo shavings to catalyze the formation of hydrochar, but also facilitate the development of the pore structure of hydrochar. Moreover, the effects of different FeCl3 solution concentrations, activation temperatures, and KOH/hydrochar ratios on the pore structure of BHPCs and the electrochemical performance of supercapacitors are thoroughly investigated. Compared with the hydrothermal carbonization without FeCl3 addition, the BHPCs (1‐BHPC‐800‐5) electrode materials obtained by FeCl3‐catalyzed hydrothermal pretreatment have superior specific surface area (up to 3688 m2 g−1) and total pore volume (as high as 1.989 cm3 g−1). Meanwhile, the best‐performing 1‐BHPC‐800‐5 demonstrates outstanding electrochemical performance in supercapacitor applications, providing a pleasant capacitance of 378 F g−1 at 0.5 A g−1 and capacitance retention of 96.6% after 10 000 charge/discharge cycles at 5.0 A g−1 in 6.0 M KOH electrolyte. The energy density can reach 10.3 Wh kg−1 at a power density of 250 W kg−1 in a two‐electrode system. Therefore, this novel and efficient catalytic hydrothermal pretreatment method offers a promising prospect for converting waste biomass into hierarchical porous carbon materials with a large specific surface area and excellent electrochemical properties. Key Points Adopting a green FeCl3‐catalyzed hydrothermal pretreatment method to convert bamboo shavings waste into BHPCs. BHPCs exhibit a hierarchical porous structure and an ultra‐high specific surface area (up to 3688 m2 g−1). A very high capacitive performance (378 F g−1 at 0.5 Ag−1) is achieved. The excellent rate performance (nearly 71% capacitance retention), outstanding cycle stability (capacitance retention of 96.6% after 10 000 charge/discharge cycles) and large energy density (10.3 Wh kg−1 at 250 W kg−1) are demonstrated.

Catalytic Graphitization for Preparation of Porous Carbon Material Derived from Bamboo Precursor and Performance as Electrode of Electrical Double-Layer Capacitor

Green Synthesis of Fe-Decorated Carbon Sphere/Nanosheet Derived from Bamboo for High-Performance Supercapacitor Application

Study on Bamboo-Derived Activated Carbon As Catalyst Support

Preparation of High-Performance Porous Carbon Materials by Citric Acid-Assisted Hydrothermal Carbonization of Bamboo and Their Application in Electrode Materials

Conversion of high moisture biomass to hierarchical porous carbon via molten base carbonisation and activation for electrochemical double layer capacitor

Hierarchical Porous Carbon Derived from Recycled Bamboo Waste As Supercapacitors Electrodes Based on FeCl 3 ‐catalyzed Hydrothermal Pretreatment: Pore Regulation and High‐performance Analysis

Mesoporous Carbon Materials As Electrodes for Electrochemical Double-Layer Capacitor

Preparation and Electrochemical Properties of PF-based Activated Carbon

Catalytic graphitization assisted synthesis of Fe3C/Fe/graphitic carbon with advanced pseudocapacitance

Hierarchical porous carbon derived from recycled bamboo waste as supercapacitors electrodes based on FeCl3‐catalyzed hydrothermal pretreatment: Pore regulation and high‐performance analysis

Enhanced performance of porous carbon microspheres from bamboo fiber for supercapacitors through acid-assisted hydrothermal carbonization

Synthesis of highly porous activated carbon nanofibers derived from bamboo waste materials for application in supercapacitor

Porous Carbon from Bamboo As a Novel Carbon Support/Electrocatalyst of Air-Cathodes

Porous Graphitic Carbons Prepared by Combining Chemical Activation with Catalytic Graphitization

Nickel Acetate-Assisted Graphitization of Porous Activated Carbon at Low Temperature for Supercapacitors With High Performances

Hierarchical Porous Heteroatoms—Co-Doped Activated Carbon Synthesized from Coconut Shell and Its Application for Supercapacitors

Promoting hierarchical porous carbon derived from Bamboo via copper doping for high-performance supercapacitors

Production of Porous Carbon by the Synergistic Chemical and Physical Activations and its Capacitive Performance

Ball milling-assisted synthesis and electrochemical performance of porous carbon with controlled morphology and graphitization degree for supercapacitors

A novel mesoporous carbon with straight tunnel-like pore structure for high rate electrochemical capacitors

Nitrogen-doped porous carbon derived from cross-cutting bamboo for high-performance supercapacitors by one-pot ball milling method