Abstract:High surface area activated carbons were prepared with Spartina alterniflora and cotton stalk as raw materials and KOH as activating agent. Effects of materials type, impregnation ratio, activation temperature and heat preservation time on the yield, elemental composition and adsorptive capacity of activated carbon were studied. The properties and pore structure of the carbons were characterized with nitrogen adsorption, powder X-ray diffractometry (XRD), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Main pore characteristics of activated carbons were analyzed by BET equation, Horvath-Kawazoe BET method and DFT method. The considerable preparation conditions are obtained as follows: impregnation ratio of 3: 1, an activation temperature of 800 degrees C and an activation time of 1.5 h. The BET surface area of activated carbon prepared from Spartina alterniflora reached 2 825 m2 x g(-1) when its total pore volume, yield, iodine number and methylene blue adsorption were 1.374 cm3 x g(-1), 16.36%, 1797 mg x g(-1) and 495 mg x g(-1) respectively under above conditions. The activated carbon from cotton stalk was prepared with BET surface area of 2 135 m2 x g(-1), total pore volume of 1.038 cm3 x g(-1), yield of 11.22%, methylene blue adsorption of 1 251 mg x g(-1), and iodine number of 478 mg x g(-1), respectively. The methylene blue adsorption and iodine number are much higher than the national first level for activated carbon. The Langmuir maximum adsorption capacities of 2,4-dinitrophenol on the two carbons were 932 mg x g(-1) and 747 mg x g(-1), respectively, which are superior to ordinary activated carbon and activated carbon fiber.

Study on Bamboo-Derived Activated Carbon As Catalyst Support

Bamboo Derived Activated Carbon As Highly Efficient Catalysts for the Oxidation and Adsorption of Hydrogen Sulfide at Room Temperature

Preparation of Bamboo-Based Activated Carbon

Porous Carbon from Bamboo As a Novel Carbon Support/Electrocatalyst of Air-Cathodes

Characterization and Electrochemical Performance of Bamboo Charcoal

Preparation of Bamboo-derived Activated Carbon for Direct Carbon Fuel Cell

Growth and Characterization of Bamboo-Like Multiwalled Carbon Nanotubes over Cu/Al2o3 Catalyst

Preparation of Bamboo-Based Activated Carbon and Its Application in Direct Carbon Fuel Cells

Bamboo-Based Activated Carbon for DCFC Prepared by KOH Activation

VOCs Adsorption of Resin-Based Activated Carbon and Bamboo Char: Porous Characterization and Nitrogen-Doped Effect

3D Hierarchical Porous Activated Carbon Derived from Bamboo and Its Application for Textile Dye Removal: Kinetics, Isotherms, and Thermodynamic Studies

Effect of Surface Properties of Activated Carbon on CO Oxidation over Supported Wacker-type Catalysts

Nitrogen-Doped Porous Carbon from Biomass with Efficient Toluene Adsorption and Superior Catalytic Performance

Activated carbon as catalyst support: precursors, preparation, modification and characterization

Catalytic Graphitization for Preparation of Porous Carbon Material Derived from Bamboo Precursor and Performance as Electrode of Electrical Double-Layer Capacitor

Preparation and Characteristics of N-Doped Titania Coating Bamboo Charcoal

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Preparation of High-Performance Porous Carbon Materials by Citric Acid-Assisted Hydrothermal Carbonization of Bamboo and Their Application in Electrode Materials

Modified bamboo-based activated carbon as the catalyst carrier for the gas phase synthesis of vinyl acetate from acetylene and acetic acid

Preparation of Activated Carbon from Bamboo Sawdust by Two-step Activation

Granular Bamboo-Derived Activated Carbon for High CO(2) Adsorption: the Dominant Role of Narrow Micropores.