Abstract:A green and novel FeCl3‐catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo‐based hierarchical porous carbons (BHPCs) with ultra‐high specific surface area and excellent electrochemical properties. Summary Herein, a green and novel FeCl3‐catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo‐based hierarchical porous carbons (BHPCs) with ultra‐high specific surface area and excellent electrochemical properties. Utilizing this mild FeCl3 catalyst can not only promote the dehydration, condensation, and carbonization of bamboo shavings to catalyze the formation of hydrochar, but also facilitate the development of the pore structure of hydrochar. Moreover, the effects of different FeCl3 solution concentrations, activation temperatures, and KOH/hydrochar ratios on the pore structure of BHPCs and the electrochemical performance of supercapacitors are thoroughly investigated. Compared with the hydrothermal carbonization without FeCl3 addition, the BHPCs (1‐BHPC‐800‐5) electrode materials obtained by FeCl3‐catalyzed hydrothermal pretreatment have superior specific surface area (up to 3688 m2 g−1) and total pore volume (as high as 1.989 cm3 g−1). Meanwhile, the best‐performing 1‐BHPC‐800‐5 demonstrates outstanding electrochemical performance in supercapacitor applications, providing a pleasant capacitance of 378 F g−1 at 0.5 A g−1 and capacitance retention of 96.6% after 10 000 charge/discharge cycles at 5.0 A g−1 in 6.0 M KOH electrolyte. The energy density can reach 10.3 Wh kg−1 at a power density of 250 W kg−1 in a two‐electrode system. Therefore, this novel and efficient catalytic hydrothermal pretreatment method offers a promising prospect for converting waste biomass into hierarchical porous carbon materials with a large specific surface area and excellent electrochemical properties. Key Points Adopting a green FeCl3‐catalyzed hydrothermal pretreatment method to convert bamboo shavings waste into BHPCs. BHPCs exhibit a hierarchical porous structure and an ultra‐high specific surface area (up to 3688 m2 g−1). A very high capacitive performance (378 F g−1 at 0.5 Ag−1) is achieved. The excellent rate performance (nearly 71% capacitance retention), outstanding cycle stability (capacitance retention of 96.6% after 10 000 charge/discharge cycles) and large energy density (10.3 Wh kg−1 at 250 W kg−1) are demonstrated.

Fermentation-hot pressing assisted preparation of bamboo green-activated carbon for supercapacitors

Preparation of biomass activated carbon with aligned graphene nanosheet arrays from bamboo parenchymal cells for supercapacitors

Preparation of High-Performance Porous Carbon Materials by Citric Acid-Assisted Hydrothermal Carbonization of Bamboo and Their Application in Electrode Materials

Enhanced performance of porous carbon microspheres from bamboo fiber for supercapacitors through acid-assisted hydrothermal carbonization

Preparation of Porous Biochar and Its Application in Supercapacitors

Green synthesis of N, O, P co-doped porous carbon from co-pyrolysis of bamboo and ammonium polyphosphate for supercapacitors

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Synthesis of bamboo-derived porous carbon: exploring structure change, pore formation and supercapacitor application

Porous carbon derived from cashew nut husk biomass waste for high-performance supercapacitors

Hierarchical Porous Carbon Derived from Recycled Bamboo Waste As Supercapacitors Electrodes Based on FeCl 3 ‐catalyzed Hydrothermal Pretreatment: Pore Regulation and High‐performance Analysis

Hierarchical porous carbon derived from recycled bamboo waste as supercapacitors electrodes based on FeCl3‐catalyzed hydrothermal pretreatment: Pore regulation and high‐performance analysis

Conversion of high moisture biomass to hierarchical porous carbon via molten base carbonisation and activation for electrochemical double layer capacitor

Activated biomass carbon made from bamboo as electrode material for supercapacitors

Bamboo-based hierarchical porous carbon for high-performance supercapacitors: the role of different components

KHCO3 Chemical-Activated Hydrothermal Porous Carbon Derived from Sugarcane bagasse for Supercapacitor Applications

Preparation of biomass composite activated carbon based supercapacitor materials and their application in energy storage devices

Different pretreatment methods combined with subsequent activation to convert waste eucalyptus bark into porous carbon electrode materials for supercapacitors

Dielectric barrier discharge low-temperature plasma modification of bamboo charcoal for supercapacitor applications

Nitrogen-doped porous carbon derived from cross-cutting bamboo for high-performance supercapacitors by one-pot ball milling method

Porous Carbon derived from Pine Nut Shell prepared by Steam Activation for Supercapacitor Electrode Material

Synthesis of highly porous activated carbon nanofibers derived from bamboo waste materials for application in supercapacitor