Abstract:A 1/15 scale model was employed to investigate the static behaviors of a novel crescent-shaped cable-truss tensile system used as a canopy structure in Yueqing stadium,Zhejiang Province.The similarity ratios of some physical parameters between experiment model and practical structure were analyzed.The coincidence of similarity ratios is numerically verified by checking the internal forces and displacements of the scaled model.Some typical joint details of the experiment model,measurement methods of cable tension and nodal displacement,as well as cable prestretching and load applying methods were introduced.The properties of pretension distribution in initial configuration were investigated for the model structure after erection by stretching the upper and lower radial cables and also controlling their tension forces.Loading tests were further carried out for four load cases,including self-weight,dead load,half-span live load and whole-span live load.The corresponding internal forces of radial cables and ring cables,joint displacements of ring cables were measured.The testing results reveal that the structural design pretension can be established effectively by the method of controlling the tension forces of the upper and lower radial cables.The relative deviation of measured tension forces of ring cables can be controlled within 3.3% compared with the theoretical values.The responses of internal force and displacement of this crescent-shaped cable-truss structural model under four load cases also have well coincidence with the design values,and reflect the reliability of practical structure in stiffness and load-bearing capacity under the design pretension.

Static Experimental Study on Model of Inner Concave Cable Arch Structure for the New Guangzhou Railway Station

Model Experiment on the Static Behaviors of a Crescent-Shaped Cable-Truss Canopy Structure

An experimental study on large-span spatial cable-truss tensile structure model

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

The model experimental research on rib-patterned large-span spatial cable-truss tensile structure with annular plane

Model Designing and Static Experimental Study on Double Inner and Outer Latticed Shell String Structure

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Calculation of stayed-buckle cable forces for concrete-filled steel tubular arch bridge with long span in process of lifting

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Experimental investigation on cable-strut arch structures

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF A TOWER OF A CABLE STAYED BRIDGE OF THE SECOND YANGIZE RIVER BRIDGE IN NANJING

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

SCHEME COMPARATION OF STRENGTHENING CONTINUOUS PRESTRESSED CONCRETE BOX GIRDER BRIDGE BY EXTERNAL PRESTRESSED CABLE

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Scaled Model Test for the Stability of Space-Truss Arch Supported Cable Network Structures

Model Experiment and Finite Element Analysis for the Stresses on the Structure of Arch Foot

Static Load Experimental Investigation to Model of Cable- Strut Portal Frame