Abstract:A high-end permanent magnet (PM) synchronous motor's cogging torque is a significant performance measure (PMSM). During the running of the motor, excessive cogging torque will amplify noise and vibration. Therefore, the cogging torque must be taken into account while optimizing the design of motors with precise motion control. In this research, we proposed a local optimization-seeking approach (RSM+NSGA-II-LR) based on Response Surface Methodology (RSM) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II), which reduced the cogging torque of a permanent magnet synchronous motor (SPMSM). To reduce the complexity of optimization and increase its efficiency, the sensitivity analysis method was utilized to identify the structural parameters that had a significant impact on the torque performance. Second, RSM was utilized to fit the functional relationship between the structural parameters and each optimization objective, and NSGA-II was integrated to provide the Pareto solution for each optimization objective. The solution with a greater average torque than the initial motor and the lowest cogging torque was chosen, and a new finite element model (FEM) was created. On the basis of the sensitivity analysis, the structural factors that had the highest influence on the cogging torque were selected, and the RSM is utilized for local optimization to lower the cogging torque as much as feasible. The numerical results demonstrated that the optimization strategy presented in this study effectively reduced the cogging torque of the motor without diminishing the motor's average torque or increasing its torque ripple.

Cogging torque reduction of Bldc motor using level set based topology optimization incorporating with triangular finite element

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Reduction of Commutation Torque Ripple in Brushless DC Motors

Optimization Techniques for Cogging Torque Reduction and Thermal Characterization in Brushless DC Motor

A Manufacturing Oriented Topology Optimization Methodology for Permanent Magnet Synchronous Motor

Using Multi-objective Optimization and Finite Element Method to Reduce Cogging Torque in a Brushless DC Motor

Torque optimization strategy for outer rotor permanent magnet brushless DC motor based on metamodel and CRITIC–TOPSIS method

A Study on Cogging Torque Reducing Method of BLDC Motors

Cogging Torque Reduction of Permanent Magnet Motor Based on Particle Swarm Optimization Algorithm

Optimization of the Different Pole Arc Combination to Reduce the Cogging Torque in PMDC Motors

Torque Ripple Reduction in Single Phase Brushless DC Motors of High Magnetic Load

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II

Topology Optimization of Rotor Pole in Switched Reluctance Motor for Minimum Torque Ripple

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Asymmetrical Magnets in Rotor Structure of a Permanent Magnet Brushless DC Motor for Cogging Torque Minimization

Theoretical and Simulation Analysis of Influences of Stator Tooth Width on Cogging Torque of BLDC Motors

Cogging Torque Reduction of Brushless DC Motor: Investigating the Efficacy of Ra-dial Pole Shaping Technique with Novel Bump-Shaped Rotor Pole

A Practical Method to Eliminate the Conduction Torque Ripple in BLDCM Using Cascade Topology

Topology and preliminary design of slotless brushless DC motor