Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

FINITE ELEMENT SIMULATION OF STRAIN LOCALIZATION ON A SHEAR BAND OF SAND UNDER PLANE STRAIN CONDITION

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Constitutive Equations and Finite Element Implementation of Strain Localization in Sand Deformation

Numerical Analysis of Dynamic Strain Localisation in Initially Water Saturated Dense Sand with a Modified Generalised Plasticity Model

Study on Implementation Algorithm for Simulation the Softening with Strain Localization in Plane Strain Compression Behavior of Sand

Progressive failure behavior of saturated fine sand based on digital image measuring system

A Predictive Model And Evaluation For Deformation Band In Saturated Sand

Formula for inclination angle of shear band based on soil state and microscopic characteristics in sands

Theoretical Prediction of Strain Localization in Anisotropic Sand by Non-coaxial Elasto-Plasticity

Strain Localisation Modelling and Pore Pressure in Saturated Sand Samples

FEM Analyses on Rate-dependent Behaviors of Sand Due to Its Viscous Properties

A rate-dependent constitutive model for sand and its FEM application

Strain Localization of Anisotropic Sand

Finite Element Numerical Implementation For Simulation Of Deformation Band In Saturated Sand

Elastoplastic strain localization analysis of soil slope

STRAIN ENERGY-BASED ELASTO-VISCOPLASTIC CONSTITUTIVE MODELLING OF SAND FOR NUMERICAL SIMULATION

Numerical Simulation of the Failure of Dense Sands Reinforced with a Smooth Brass Plate in Plane Strain Compression

On strain localization of aeolian sand in true triaxial apparatus

NUMERICAL ANALYSIS OF PROGRESSIVE DEFORMATION AND FAILURE OF REINFORCED SAND SLOPES