Abstract:Although Toyoura sand has been widely used as a standard material for physical model tests (particularly centrifuge model tests), its path-dependent stiffness degradation curves are rarely reported in the literature. This leads to difficulties in back-analyzing and understanding the physical tests involving significant changes in the direction of stress paths (such as unloading problems). In this study, path-dependent stiffness degradation curves of medium-dense Toyoura sand were determined by carrying out a series of stress-path triaxial tests, with local strain measurements. In the triaxial tests, four typical recent stress histories (changes of path direction = 0, 90, -90, and 180 degrees) were simulated. The measured small strain stiffnesses of Toyoura sand were then used to calibrate an advanced hypoplastic model that accounts for path-dependent soil stiffness at small strains. To justify the validity of the calibrated hypoplastic model and model parameters, a Type A numerical prediction and a centrifuge model test were carried out to simulate a typical unloading problem (i.e., excavation) in medium-dense Toyoura sand. Triaxial test results show that a 180 degrees reversal in the direction of the stress path increased the initial secant modulus of Toyoura sand by eight times. The path dependency of soil stiffness, however, vanished when the deviatoric strain exceeded 0.3%. The ground deformations (resulting from excavation) predicted by the numerical analysis show reasonable agreement with the measured data from the centrifuge test. This suggests the potential applicability of the calibrated soil model and its model parameters in predicting or back-analyzing other physical model tests in Toyoura sand.

STRAIN ENERGY-BASED ELASTO-VISCOPLASTIC CONSTITUTIVE MODELLING OF SAND FOR NUMERICAL SIMULATION

An Energy-Based Elasto-Viscoplastic Model For Sand

A work-hardening and softening constitutive model for sand: modified plastic strain energy approach

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

AN ELASTOPLASTIC MODEL FOR SAND CONSIDERING DISTURBANCE

An Elasto-plastic Constitutive Model with Hardening-softening Behavior for Sandy Soil Based on Modified-plastic Work State Function

A rate-dependent constitutive model for sand and its FEM application

Simulating the viscous behavior of sandy ground by FEM

FEM Simulation of Failure of Reinforced Sand Based on a New Work-Hardening Constitutive Model

Elasto-Viscoplastic Simulation of Bearing Capacity Characteristics of Strip Footing on Reinforced Sand

A Double Modified Plastic Work-Hardening Constitutive Model for Sand under Plane-Strain Conditions

Viscous properties of sandy foundation and its finite element simulation

An elastic–viscoplastic constitutive model incorporating shear dilation characteristic

Numerical Method for Modeling the Constitutive Relationship of Sand under Different Stress Paths

Elasto-plastic constitutive modeling for granular materials

An Elasto-plastic Double-hardening Constitutive Model for Shanghai Fine Sand Based on Modified Plastic Work

VISCOUS BEHAVIORS AND CONSTITUTIVE MODELING OF SAND UNDER PLANE STRAIN LOADING-UNLOADING TESTS

Small Strain Path-Dependent Stiffness of Toyoura Sand: Laboratory Measurement and Numerical Implementation

A Unified Elastoplastic Model Of Sand Dependent On Stress Level And Void Ratio

Numerical Study on the Elasto-Plastic Behavior of Sand

AN ELASTIC-PLASTIC CONSTITUTIVE MODEL FOR SAND BASED ON MICROMECHANICS METHOD