Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

A rate-dependent constitutive model for sand and its FEM application

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

AN ELASTOPLASTIC MODEL FOR SAND CONSIDERING DISTURBANCE

Micromechanics-based multimechanism bounding surface model for sands

Constitutive Model And Its Application Of Flow Deformation Induced By Liquefied Sand

An elastic–viscoplastic constitutive model incorporating shear dilation characteristic

Three-dimensional multi-mechanism bounding surface model for sands

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

Constitutive model for soil with strain-softening behavior and its application in boundary value problems

A Unified Plasticity Model for Large Post-Liquefaction Shear Deformation of Sand

A State-Dependent Multi-Mechanism Model for Sands

A Basic Constitutive Model for Sands

A novel constitutive model of the anisotropic sand accounting for the fabric evolution

Small-strain Shear Moduli Modeling of Sand: a Non-Equilibrium Thermodynamic Approach, Including an Application to Leighton Buzzard Sand

Mechanism and modeling of post-earthquake flow deformation of dilative sand