Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Progressive failure behavior of saturated fine sand based on digital image measuring system

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Experimental Study on the Features of Infrasonic Waves of Sandstone under Shear Load

Experimental Study on Mesoscopic Shear Behavior of Calcareous Sand Material with Digital Imaging Approach

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

RESEARCH OF DYNAMIC PROPERTIES CHANGES AND MICROSCOPIC MECHANISM OF AGEING SAND

Experimental Research On Behaviors Of Saturated Loose Sand Subjected To Oblique Ellipse Stress Path

A micro-investigation of unsaturated sand in mini-triaxial compression based on micro-CT image analysis

Study on Progressive Damage and Failure of Sandstone Samples subjected to Cyclic Disturbance Loads using a Modified Triaxial Test System

3D digital-image correlation insight into generalized relaxation behavior of sandstone under stress and pore pressure coupling

The Influence of Undrained Cyclic Loading Patterns and Consolidation States on the Deformation Features of Saturated Fine Sand over a Wide Strain Range

Mechanical properties and energy evolution law of water bearing sandstone under cyclic loading

Shear Failure Mechanisms of Sandstone Subjected to Direct, True Triaxial and Confining Shear Test Conditions

Experimental Study of Compression Deformation Patterns in Sands Based on Digital Image Analysis

Progressive Failure Characterization of Sandstone from Yingjinshan Area in Qinghai-Tibet Plateau

Stress-strain Response of Saturated Sand During Cyclic Water Absorption Shearing

Nonlinear Mechanical and 3D Rupture Morphology of Saturated Porous Sandstone Under True Triaxial Stress

Undrained Cyclic Response and Resistance of Saturated Calcareous Sand considering Initial Static Shear Effect

Study on the influence of pore water pressure on shear mechanical properties and fracture surface morphology of sandstone