Abstract:Studying the true triaxial deformation characteristics and progressive damage behavior of sandstone is of great significance for the stability control of roadways. Both the conventional triaxial test (CTT) and the true triaxial compression test (TTT) were conducted for sandstone to investigate its deformation characteristics and the variation laws of volume strain during the progressive damage process under different confining pressures. The conducted experiments showed that both the axial and lateral strains of the rock prior to failure under CTT conditions increased with increasing confining pressure. However, with increasing intermediate principal stress (σ2) under TTT conditions, both the axial strain, and the lateral strain (ε2) gradually decreased, and the lateral strain (ε3, expansion) first slow down and then accelerated. Moreover, the anisotropic characteristics first gradually weakened and then enhanced. The variation of the volume strain increment and the volume strain rate of rock combined with the acoustic emission activity and a three-dimensional rock theoretical model with microcrack defects were analyzed in detail. During the stable crack growth stage III, the volume strain increment and volume strain rate increased with increasing confining pressure under CTT conditions, while they decrease after the initial increase with increasing σ2 under TTT conditions. During the unstable crack growth stage IV, the volume strain increment increased sharply, while the volume strain rate gradually slowed down with increasing confining pressure under CTT conditions. The internal cracks of the rock were gradually suppressed and the lateral expansion was gradually constrained. The volume strain increment first increased followed by a decrease, and the volume strain rate gradually slowed down after a noticeable acceleration with increasing σ2 under TTT conditions. The internal micro-cracks gradually evolved from inhibition (in the planes parallel to plane 1–2 and plane 2–3) to accelerated expansion (the planes along the σ2 direction), and the lateral deformation first weakened and then strengthened.

Shear Failure Mechanisms of Sandstone Subjected to Direct, True Triaxial and Confining Shear Test Conditions

Experimental Study on the Features of Infrasonic Waves of Sandstone under Shear Load

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

True triaxial shear creep behaviors of sandstone under constant normal load and constant normal stiffness conditions

Experimental Investigation on Shear Mechanical Behavior of Sandstone Containing a Pre-existing Flaw Under Unloading Normal Stress with Constant Shear Stress

Study on Failure Characteristics and Acoustic Emission Characteristics of Sandstone Under Variable Angle Shear

Study on the influence of pore water pressure on shear mechanical properties and fracture surface morphology of sandstone

Failure Characteristics and Scale in a Sandstone Joint Subjected to Direct Shear Testing: Experimental Investigation with Acoustic Emission Monitoring

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone

Nonlinear Mechanical and 3D Rupture Morphology of Saturated Porous Sandstone Under True Triaxial Stress

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

Impact of Inclined Fault and Spherical Cavity on Sandstone Failure and Acoustic Response Under Triaxial Compression

Influence of moisture content and intermediate principal stress on cracking behavior of sandstone subjected to true triaxial unloading conditions

Strength, deformation, and failure characteristics of hollow cylinder sandstone under axial–torsional tests

Effect of lateral stress on shear strength of jointed hard rocks in true triaxial single-shear test

Experimental Investigation on the Strength, Deformability, Failure Behavior and Acoustic Emission Locations of Red Sandstone under Triaxial Compression

Failure Behavior of Sandstone Specimens Containing a Single Flaw Under True Triaxial Compression

Effect of Confining Pressure and Strain Rate on Mechanical Behaviors and Failure Characteristics of Sandstone Containing a Pre-existing Flaw

Investigating the Mechanical Deterioration Effect of Hard Sandstone Induced by Layer Structure under Uniaxial Compression

Experimental Method for Direct Shear Tests of Hard Rock under Both Normal Stress and Lateral Stress