Abstract:In order to study the prevention of roadway roof bending, sinking, and breaking and the prevention of dynamic disasters such as the appearance of rock bursts, three-point bending experiments of sandstone under different spans were carried out. By using stress loading system and acoustic emission technology, the acoustic emission characteristic parameters of the sandstone fracture process were analyzed, the precursory information of rock bending fracture was explored, and the evolution law of sandstone damage based on acoustic emission characteristics was obtained. The results showed that according to the variation of acoustic emission ringing count, the load-time curve was divided into four typical stages: the first stage showed an overall increasing trend; the second stage showed an obvious increasing trend; the third stage showed obvious accelerated growth and the acoustic emission ringing count reached the maximum at the moment of rupture. In the fourth stage, the amplitude and frequency of the ringing count are large and high. With the increase in span, the cumulative ringing counts of AE decreased, and the rate of change gradually decreased. The fracture process of three-point bending sandstone can reflect the precursor information of rock fracture from time domain, frequency domain, and R value (ratio of cumulative acoustic emission ringing count to cumulative energy count). In time domain, the evolution characteristics of AE cumulative ringing count stage II can be used to predict the three-point bending fracture of sandstone. The peak frequency shows a linear increase after a spike and then an accelerated increase to a rupture, and the boundary point between the spike and the linear and nonlinear can be obtained. The decrease in R value can indicate that the main crack is growing in the specimen. According to the damage rate, the characteristics of the damage variables can be divided into five stages: stationary and low, gradually increasing, gradually decreasing, main crack coalescence, and complete fracture. With the increase in span, the fracture damage shows a decreasing trend. The residual damage fluctuates between 0.38 and 0.40 due to the difference in crack propagation trajectory. It has theoretical research value for revealing the internal mechanism of rock bending and fracture and has engineering guiding significance for mine pressure and rock strata control and dynamic disaster prevention.

Study on Failure Characteristics and Acoustic Emission Characteristics of Sandstone Under Variable Angle Shear

Experimental Study on the Features of Infrasonic Waves of Sandstone under Shear Load

Shear Failure Mechanisms of Sandstone Subjected to Direct, True Triaxial and Confining Shear Test Conditions

Study on Acoustic Emission and Crack Propagation Characteristics of Single-Fissured Sandstone with Different Angles Under Uniaxial Compression

Laboratory Shear Behavior of Tensile- and Shear-Induced Fractures in Sandstone: Insights from Acoustic Emission

Crack evolution and fractal characteristics of fractured red sandstone based on acoustic emission parameters

Influence of Inclination Angle on the Acoustic Emission Characteristics of Pre-Cracked Sandstone in Uniaxial Arc Cyclic Loading and Unloading Tests

Compressive Fracture Behavior and Acoustic Emission Characteristics of Sandstone under Constant Crack Water Pressure

Failure Characteristics and Scale in a Sandstone Joint Subjected to Direct Shear Testing: Experimental Investigation with Acoustic Emission Monitoring

Investigating the Comprehensive Index of Acoustic Emissions and Fractal Characteristics of Damage of Red Sandstone Based on Information Entropy

Experimental Investigation on Shear Mechanical Behavior of Sandstone Containing a Pre-existing Flaw Under Unloading Normal Stress with Constant Shear Stress

Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance

Experimental Study on Acoustic Emission Features and Energy Dissipation Properties during Rock Shear-Slip Process

Study on the influence of pore water pressure on shear mechanical properties and fracture surface morphology of sandstone

Acoustic Emission Characteristics and Damage Evolution Analysis of Sandstone under Three-Point Bending Test

Cracking process and acoustic emission characteristics of sandstone with two parallel filled-flaws under biaxial compression

Pre-peak acoustic emission characteristics of tight sandstone failure under true triaxial stress

Impact of Inclined Fault and Spherical Cavity on Sandstone Failure and Acoustic Response Under Triaxial Compression

Study on the AE Characteristics and Energy Evolution Mechanism of Sandstone with Different Aspect Ratios Under Biaxial Compression

An experimental study of Lode angle impact on the rock failure procession based on acoustic emission

Experimental study on mechanical and acoustic emission characteristics of sedimentary sandstone under different loading rates