Pre-peak acoustic emission characteristics of tight sandstone failure under true triaxial stress

Jie Huang,Qianting Hu,Chao-Zhong Qin,Zhenlong Song,Xiaodong Wang

DOI: https://doi.org/10.1016/j.jngse.2022.104576

IF: 5.285

2022-06-01

Journal of Natural Gas Science and Engineering

Abstract:In this study, experimental investigations were conducted on low-porosity sandstone specimens to reveal their pre-peak cracking characteristics under constant mean stress (σm, 100 MPa) and varying stress Lode angles (θσ, −30° to +30°). The acoustic emission (AE) characteristics 50 s before specimen failure, as well as the strengths and fracturing surface networks, are presented and discussed. The results show that the values of the three principal stresses when the specimen failure occurs change linearly with increasing θσ, in which the maximum principal stress linearly decreases. The AE energy distribution exhibits three ranges, which can be speculated as the different stages of rock cracking propagation. The AE peak frequency is distributed unevenly in seven bands, in which over 90% of the AE signals are located in the 75–95 kHz and 96–130 kHz ranges, which correspond to the tensile and shear cracks, respectively. The RA-AF dynamic evolution curves reveal that the ultimate failure is driven by shear fractures under 3D stress states (for all θσ). The pattern of macrocrack networks shows the "double-X″ through-going mode, and clear tensile and shear areas were directly observed on the fracturing surfaces. These findings are deemed essential for determining the failure mechanism of deep engineering rock masses.

energy & fuels,engineering, chemical