Abstract:<p>The acoustic emission (AE) location technique is used to characterize the entire progressive failure process of rock with preexisting cracks. The mechanical properties, AE characteristics, crack dynamic propagation process, failure modes and damage-fracture evolution rules are studied for prefabricated rock samples with different crack inclination angles under uniaxial compression. The results show that the peak strength and elastic modulus first decrease and then increase with increasing crack angle. AE events exhibit different characteristics with changes in stress. In the initial compaction and elastic deformation stage, the AE activity is not obvious; when microcracks form in the rock sample, the AE count increases; after entering the crack stable growth stage, the AE activity becomes significant; during the period of unstable crack propagation to rock failure, the AE activity is extremely active. The AE location can well accurately reflect the crack initiation position, propagation direction and surface orientation in the rock. AE location can well reflect cracks initiation position, propagation direction and space surface shape in the rock. For intact samples, microcracks are first generated at the ends of the sample and extend internally along the loading direction until they coalesce and form macroscopic cracks; for precracked samples, microcracks appear first at the tips of the prefabricated crack, and extend outward at a certain angle, while the microcracks are mainly concentrated around the preexisting crack, with a small number of microcracks distributed at both ends of the sample. With increasing the crack angle, the rock failure mode changes from splitting failure to tension-shear mixed failure and finally to single shear failure. The AE positioning results are in good agreement with the observed macroscopic failure of the rock samples. The damage variable based on AE counts divides the rock damage-fracture evolution process into four stages, and the initial damage and damage rate of the rock sample with a crack angle of 45° are the largest.</p>

Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance

Experimental investigation of microscopic crack development and damage characteristics of sandstone based on acoustic emission characteristic parameters

Experimental study on mechanical and acoustic emission characteristics of sedimentary sandstone under different loading rates

Study on the mechanism of energy evolution and bearing degradation in pre-cracked sandstone under non uniform cyclic loading

Experimental research on the acoustic emission characteristics of rock under uniaxial compression

Experimental Study on Mechanical Properties, Acoustic Emission Energies and Failure Modes of Pre-cracked Rock Materials under Uniaxial Compression

Acoustic-Mechanical Responses of Intact and Flaw-Contained Rock Deformation under Uniaxial Compression: A Comparison

Experimental exploration of damage propagation in rocks using acoustic emission

Failure mechanism of fractured rock and associated acoustic behaviors under different loading rates

Acoustic Emission,fractal and Chaos Characters in Rock Stress-Strain Procedure

Experimental Study on Mechanical Properties, Energy Dissipation Characteristics and Acoustic Emission Parameters of Compression Failure of Sandstone Specimens Containing En Echelon Flaws

Experimental investigation on mechanical, acoustic, and fracture behaviors and the energy evolution of sandstone containing non-penetrating horizontal fissures

Experimental Study on Acoustic Emission Features and Energy Dissipation Properties during Rock Shear-Slip Process

The Acoustic Emission Behavior and Its Fractal Characteristics of the Sandstone Under the Disturbance Stress Paths

Study on Acoustic Emission Characteristics and Damage Evolution Law of Shale under Uniaxial Compression

Study on Staged Damage Behaviors of Rock-like Materials with Different Brittleness Degrees Based on Multiple Parameters

Study on crack dynamic evolution and damage-fracture mechanism of rock with pre-existing cracks based on acoustic emission location

Microdynamic mechanical properties and fracture evolution mechanism of monzogabbro with a true triaxial multilevel disturbance method

Effect of stress amplitude on mechanical and acoustic emission of sandstone under constant–cyclic loading

Crack evolution and fractal characteristics of fractured red sandstone based on acoustic emission parameters

Experimental Study on Mechanical and Acoustic Emission Characteristics of Red Sandstone Containing Combined Flaws of Hole-Fissure under Biaxial Compression