Abstract:In the current study, a series of laboratory triaxial loading and unloading experiments were conducted for the purpose of comprehensively understanding the effects on sandstone of loading processes under axial stress conditions and unloading processes under confining pressure conditions. The mechanical properties and crack propagation behaviors of sandstone specimens were analyzed. In addition, a new damage variable based on crack evolution was proposed. The experimental results showed that the strain-softening modulus of the sandstone specimens under triaxial loading and unloading compression conditions decreased with the increases in the loading rate. Meanwhile, the elastic modulus was only observed to undergo small changes. This study found that with the increases in the loading rates of axial stress, the deformation and strength levels of the sandstone specimens also increased. In addition, the crack initiation stress showed a linear increasing trend with the increases in the loading rates of axial stress. The peak crack volumetric strain displayed a slight increase with the loading rate of axial stress, which indicated that the larger the loading rate of axial stress on the sandstone specimens was, the smaller crack propagation strain levels at the peak stress levels would be. The crack propagation velocities were observed to be larger when the loading rates of axial stress were higher. Also, at the same loading rate of axial stress, the crack propagation velocity corresponding to the peak stress of the volumetric cracks was the largest, followed by radial cracks. The crack propagation velocity of the axial cracks was determined to be the smallest. In this study, a new crack damage variable based on crack volumetric strain was proposed. According to the evolution of the crack damage variables of the sandstone specimens, the following four stages of the failure process were obtained: original damage stage; elastic stage; linear damage stage; and accelerated damage stage. The results obtained in this research study provided an important scientific basis for the support of future designs and safety protection measures in underground mining operations.

Study on the mechanism of energy evolution and bearing degradation in pre-cracked sandstone under non uniform cyclic loading

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance

Experimental study on mechanical and acoustic emission characteristics of sedimentary sandstone under different loading rates

Failure mechanism of fractured rock and associated acoustic behaviors under different loading rates

Influence of Inclination Angle on the Acoustic Emission Characteristics of Pre-Cracked Sandstone in Uniaxial Arc Cyclic Loading and Unloading Tests

Study on the AE Characteristics and Energy Evolution Mechanism of Sandstone with Different Aspect Ratios Under Biaxial Compression

Experimental study of energy dissipation characteristics and crack coalescence modes of cracked sandstone under different cyclic loading paths

Experimental investigation of microscopic crack development and damage characteristics of sandstone based on acoustic emission characteristic parameters

Deformation localization and crack propagation of sandstone containing different flaw inclination angles under different loading rates

Crack evolution and fractal characteristics of fractured red sandstone based on acoustic emission parameters

Study on crack dynamic evolution and damage-fracture mechanism of rock with pre-existing cracks based on acoustic emission location

Study on the mechanical properties of unloading damaged sandstone under cyclic loading and unloading

Experimental investigation on mechanical, acoustic, and fracture behaviors and the energy evolution of sandstone containing non-penetrating horizontal fissures

Effect of stress amplitude on mechanical and acoustic emission of sandstone under constant–cyclic loading

Cracking process and acoustic emission characteristics of sandstone with two parallel filled-flaws under biaxial compression

Effect of Triaxial Loading and Unloading on Crack Propagation and Damage Behaviors of Sandstone: An Experimental Study

Study on Acoustic Emission and Crack Propagation Characteristics of Single-Fissured Sandstone with Different Angles Under Uniaxial Compression

Investigation of Microcrack Propagation and Energy Evolution in Brittle Rocks Based on the Voronoi Model

Progressive Failure Characterization of Sandstone from Yingjinshan Area in Qinghai-Tibet Plateau

Influence of moisture content and intermediate principal stress on cracking behavior of sandstone subjected to true triaxial unloading conditions