Abstract:Since cross-anisotropic sand behaves differently when the loading direction or the stress state changes, the influences of the loading direction and the intermediate principal stress ratio (b = (σ2 − σ3)/(σ1 − σ3)) on the initiation of strain localization need study. According to the loading angle (angle between the major principal stress direction and the normal of bedding plane), a 3D non-coaxial non-associated elasto-plasticity hardening model was proposed by modifying Lode angle formulation of the Mohr–Coulomb yield function and the stress–dilatancy function. By using bifurcation analysis, the model was used to predict the initiation of strain localization under plane strain and true triaxial conditions. The predictions of the plane strain tests show that the major principal strain at the bifurcation points increases with the loading angle, while the stress ratio decreases with the loading angle. According to the loading angle and the intermediate principal stress ratio, the true triaxial tests were analyzed in three sectors. The stress–strain behavior and the volumetric strain in each sector can be well captured by the proposed model. Strain localization occurs in most b value conditions in all three sectors except for those which are close to triaxial compression condition (b = 0). The difference between the peak shear strength corresponding to the strain localization and the ultimate shear strength corresponding to plastic limit becomes obvious when the b value is near 0.4. The influence of bifurcation on the shear strength becomes weak when the loading direction changes from perpendicular to the bedding plane to parallel. The bifurcation analysis based on the proposed model gives out major principal strain and peak shear strength at the initiation of strain localization; the given results are consistent with experiments.

On strain localization of aeolian sand in true triaxial apparatus

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Experiment of initial relative density effects on sand strength

Effect of Porosity on the Properties of Strain Localization in Porous Media under Undrained Conditions

Analysis of Strain Localization in Porous Media with Transversely Isotropic Elasticity under Undrained Conditions

Incremental behavior of granular soils: a strain response envelope perspective

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Behaviour of the aeolian sands under true-triaxial conditions

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

Structure of Artificial Soils and Its Influence on Strain Localization

Influences of loading direction and intermediate principal stress ratio on the initiation of strain localization in cross-anisotropic sand

Experimental Study of Drained Anisotropy of Granular Soils Involving Rotation of Principal Stress Direction

The effects of changing the deviatoric and spherical stresses during cyclic loading on the drained response of a sand

Effect Of Non-Coaxiality On Dilatancy Of Sand Involving Principal Stress Axes Rotation

Experimental Study on Asymptotic Behaviour of Anisotropic Sand

Experimental Investigation of Asymptotic State for Anisotropic Sand

Assessing continuum plasticity postulates with grain stress and local strain measurements in triaxially compressed sand

Influence of intermediate principal stress on the strength and deformation behavior of artificial frozen sand

Drained Responses of Granular Soil Sheared under Inclined Principal Stress Axes: Impact of Sample Preparation

Deformation of fully saturated sand under simultaneous variations of deviatoric stress ratio and principal stress rotational angle